INSERTING COMPUTER
into the DOCK
1. Make sure the sliding door (located on the
on the back edge of the computer) has
been opened, exposing the computer's
docking connector. (See Figure 7)
2. Insert the computer:
a. Align the center notch in the
computer with the front retainer tab.
b. Lower the back of the computer,
pressing down onto the Alignment
Pins.
4. Pull the docking handle towards the left
side of the dock until the latch catches and
holds the handle. (See Figure 9)
The push button latch can be locked for
added security.
5. Unit is powered and ready for use.
*Docking station will operate with computer
screen opened or closed.
Figure 7
Figure 8
Figure 9
Sliding Door
Docking Connector
Alignment Pins
Align notch
with Front Retainer.
Docking handle in
"UNDOCKED" position
Docking handle in
"DOCKED" position
Pg 6
