manualshive.com logo in svg

Panasonic TH-86EQ2W, Руководство по эксплуатации, Страница: 26 / 34

Поделиться
Скачать
Panasonic TH-86EQ2W Скачать руководство пользователя страница 26

26

English

 

■

When the Unit is turned on for the first time

Following screen will be displayed.

1

Select the language with     and 

press <ENTER>.

English (UK)

Deutsch

Français

Italiano

Español

ENGLISH (US)

Русский

OSD language

2

For vertical installation, select 

[Portrait] with     and press 

<ENTER>.

Display orientation

Landscape

Portrait

Note

● 

Once the items are set, the screens won’t be 

displayed when switching on the unit next time.  

Each item can be reset in the following menus.
[OSD language]
[Display orientation]

3

Configure the network account setting 

as necessary.

Administrator account settings

Password policy

Save

Skip

Password

User name

dispadmin

Please set the user name and password.If not set, 

could not use the Web Control function and for communication  

control via a LAN (including Panasonic application software).

Password policy

Cautions regarding the password setting in this item 

are displayed on another window.

Password policy

·Reusing passwords is not recommended.
·Password cannot be blank.
·A password consisting of at least eight half-width characters and contaning 

characters of at least three of the following four types is recommended.
·Uppercase letters
·Lowercase letters
·Digits
·Symbols (~!@#$%^&*()_+|}{][<>.,/?`)

User name

A keyboard for user name setting is displayed. Enter 

the user name.

Password

A keyboard for password setting is displayed. After 

the password is entered, select [Ok] to display a 

confirmation screen. Enter the password again and 

select [Ok] to determine the password.

Save

The user name and password set above are saved 

in the display unit.

Skip

Exits this screen without configuring this setting.

Note

● 

Once set or skipped, this screen won’t be displayed 

when switching on the unit next time. Use the following 

menu to configure the setting again.
[Network settings]

 

■

Power ON message

The following message may be displayed when turning 

the unit power ON:

No activity power off Precautions

’No activity power off’ is enabled.

When [No activity power off] in the [Setup] menu is set to 

[Enable], a warning message is displayed every time the 

power is turned ON.

“Power management” information

Last turn off due to ’Power management’.

When “Power management” is functioned, an information 

message is displayed every time the power is turned ON.

COLOUR DESIGN Information

Colour design settings are universal.

The information is displayed when [Setup] - [Colour design 

settings] - [Colour design] is set to [Universal].

These message displays can be set with the following 

menu:

● 

[Power on settings] menu
Information(No activity power off)
Information(Power management)
Information(Colour design)

Содержание TH-86EQ2W



































Отзывы:

Нет отзывов