22
English
Identifying Controls
Display
1 Power Indicator / Remote control sensor
The Power Indicator will light.
When the power of the unit is ON (Main Power On
/ Off button
: ON)
●
Picture is displayed: blue
●
When the unit enters the standby mode using the
following functions: purple
•
Standby state with the “Quick start” function
•
Standby state with the “Power management”
function
•
Standby state with [HDMI-CEC control] set to
[Enable] and at least one [Link function] set to
other than [Disable]
•
Standby state with [Network control] set to [On]
•
Standby state with the “SLOT standby” function
•
Standby state during schedule play mode
●
Standby state in conditions other than the above:
orange
When the power of the unit is OFF (Main Power
On / Off button: OFF): No light
Note
●
Even if the unit is turned off with the power
indicator off, some of the circuits are in power-on
status.
●
When the power indicator is purple, power
consumption during standby is generally larger
than that of when the power indicator is orange.
●
When [Power LED light-up setting] is set to [Off],
the power indicator does not light up.
●
For the power button, the operation with [POWER
button control setting] set to [Off] is described
unless otherwise mentioned.
INPUT
ENTER
MENU
+
-
1
2
3
4 5
6
7
8
86-inch model
75-inch model
65-inch model
9
55-inch model
50-inch model
43-inch model
9
1 External input / output terminal
Connects to video equipment, PC, etc. (see page 20)
2 Main power switch (
) (Unit)
Turns OFF ( ) or ON ( ) the main power.
Turning ON and OFF the <Main power switch> is the
same as plugging and unplugging the power plug.
Turn ON ( ) the main power first, and then turn
OFF or ON the power using the Power button of the
remote control or the unit.
3 <Main Power On / Off button> (
)
Turns the power On / Off.
4 <INPUT (Unit)>
Selects the connected device.