Panasonic TH-65SF2U Скачать руководство пользователя страница 102

Страница: 102 / 127

English

102

■

Music playback

Music content is played back at the time set with the

schedule data.
Playback files in the following formats are supported.

Music

Extension Codec

Format

mp3

MPEG-1/2

Audio Layer-3
AAC(LC)

Sample rate:

Maximum 48 kHz
Channel: Maximum 2 ch
Bit rate:

Maximum 320kbps

wma

WMA

Note

●

Some files may not be played back even if they are

supported formats described above.

●

If incompatible music content is scheduled, the music

content is not played back.

●

Music content can be played back only with the USB

input.

●

Video content and music content cannot be played

back simultaneously. If 2 pieces of content are set

for playback at the same time, video content takes

priority.

●

If video content starts to be played back while music

content is being played, the playback of the music

content stops.

●

When playing back music content after playback of

video content has finished, the playback starts from

the beginning of the music content.

●

Music content cannot be played back in

synchronization with other displays.

●

Several minutes of preparation time are added in

switching music content.

■

Input switch

The input is switched to [HDMI1] at the time set with

the schedule data. When the set time has passed, the

[USB] input is restored.

Note

●

The input is switched only to [HDMI1].

●

The input is switched even if no signal is present at

the input switch destination.

●

When the input is switched, the input display does

not appear.

■

Power control

The power is turned on/off at the time set with the

schedule data.

Note

●

If the power is turned off during schedule play mode,

the unit enters the schedule standby mode.

●

The standby electricity will be more than normal

during the schedule standby mode.

●

Some of the main unit functions in schedule play

mode remain invalid during the schedule standby

mode.

●

The power-on schedule operates one minute before

the specified schedule time.

●

If the unit enters the schedule standby mode after

one minute before the power-on schedule, the power

is not turned on at the specified time by the schedule

playback function.

●

The power-on operation by [Schedule play function]

does not work in standby states other than the

schedule standby mode.

■

Multi display setting

Sets the following for playback content.

●

Plays in the single playback mode.

●

Plays in the synchronized playback mode.

●

Changes [Multi display settings] of the main unit.

In [Individual play] mode

Content is played only on one display.

In [Synchronize play] mode

Content is played on multiple displays in

synchronization.
To play back in the synchronized playback mode, set

the following for correct operation.

•

Set [USB media player] to [Enable].

•

Set [Schedule play function] to [Enable].

•

Set [Synchronize display] to [On].

•

For [Parent or child setting], set one display with

reference time to [Parent] and other displays to

[Child].

Содержание TH-65SF2U
































































































































Результаты поиска

Содержание TH-65SF2U

Отзывы:

Похожие инструкции для TH-65SF2U

Бренды по названию

Популярные бренды

Panasonic TH-65SF2U, Руководство по эксплуатации

Результаты поиска

Содержание TH-65SF2U

Отзывы:

Похожие инструкции для TH-65SF2U

Бренды по названию

Популярные бренды