Panasonic TH-65PF9BK, Руководство по эксплуатации

Страница: 45 / 48

45
TH-65PF9BK
Power Source 220 - 240 V AC, 50/60 Hz
Power Consumption
Power on 725 W
Stand-by condition Save off 1.2 W, Save on 1.0 W
Power off condition 0.3 W
Plasma Display panel Drive method : AC type
65-inch, 16:9 aspect ratio
Screen size 1,434 mm (W) × 807 mm (H)
× 1,646 mm (diagonal)
(No.of pixels) 2,073,600 (1,920 (W) ×1,080 (H))
[5,760 × 1,080 dots]
Operating condition
Temperature 0 °C - 40 °C
Humidity 20 % - 80 %
Applicable signals
Colour System NTSC, PAL, PAL60, SECAM, Modi fi ed NTSC
Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p ·50i
·50p · 24p · 25p · 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50i
PC signals VGA, SVGA, XGA, SXGA,
UXGA ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
DVI-D Video Input
Audio Input
Content Protection
DVI-D 24 Pin x 1
compliance with DVI Revision 1.0
* Refer to page 11 for applicable signals
Stereo mini jack (M3) x 1
0.5Vrms
Compatible with HDCP 1.1
COMPONENT/RGB Y/G (BNC)
P
B
/B (BNC), P
R
/R (BNC)
AUDIO IN (RCA PIN JACK × 2)
Y or G with/sync 1.0 Vp-p (75
Ω
)
0.7 Vp-p (75
Ω
)
0.5 Vrms
PC (HIGH-DENSITY MINI D-SUB 15PIN)
B/P
B
/C
B
:
R/P
R
/C
R
:
HD/VD:
VBS(use HD port)
AUDIO IN (M3 JACK)
Y or G with/sync 1.0 Vp-p (75
Ω
)
Y or G without/sync 0.7 Vp-p (75
Ω
)
0.7 Vp-p (75
Ω
)
0.7 Vp-p (75
Ω
)
1.0 - 5.0 Vp-p (high impedance)
with/picture 1.0 Vp-p (high impedance)
without/picture 0.3 Vp-p (high impedance)
0.5 Vrms
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS (8
Ω
) 20 W [10 W + 10 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter EUR7636090R
Batteries 2 × R6 Size
Fixing bands (TMME203 or TMME187) × 2
Dimensions (W × H × D) 1,554 mm × 925 mm × 99 mm
(excluding handle portion)
Mass (weight)
main unit only approx. 74.0 kg net
with speakers approx. 78.4 kg
Notes:
• Design and speci fi cations are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
EN55022, EN55024, EN61000-3-2, EN61000-3-3.
Speci fi cations