INPUT MENU
ENTER/
+
/
VOL
-/
2
EXIT
2
1
EXIT
s
1
s
2
s
3
s
4
22
VOL button
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
During Touch Pen mode (see page 37).
During 3D image (see page 38).
When MULTI DISPLAY SETUP is ON (see page 48).
When PORTRAIT SETUP is ON (see page 50).
When SCREENSAVER (except for NEGATIVE IMAGE) is running. (see page 39)
• While Digital Zoom is in operation, “Adjusting POS./SIZE” cannot be used.
Select the magni cation required for the enlarged display.
Each time this is pressed, the magni cation factor changes.
This is shown in the image being displayed.
3
2
4
The cursor will move.
1
Display the operation guide.
Press to access Digital Zoom.
The operation guide will be displayed.
During Digital Zoom, only the following buttons can be operated.
[Remote control]
[Unit]
POSITION /
ACTION button
OFF TIMER button
VOL button
MUTE button
