manualshive.com logo in svg

Panasonic TH-65BFE1W, Руководство по эксплуатации, Страница: 43 / 53

Поделиться
Скачать
Panasonic TH-65BFE1W Скачать руководство пользователя страница 43

43

English

 

■

Menu screen of sound

You can adjust sound by either selecting [Sound] in the [Main Menu] and pressing the [OK] button of the remote 

control, or by displaying the [Sound] menu with the [SOUND] button of the remote control.

 

Sound

Sound Mode
Surround Sound
Output Select
Audio Source
Reset Audio Setting

Dynamic
Off
EXT SP
HDMI1

Menu screen of sound

[Sound Mode]

You can go to the [Sound Mode] menu by using the [OK] button of the remote control 

and you can change to the following modes.
[Sound Style]:  You can select the mode that is suitable to the audio.
[Standard]:  Factory default setting
[Dynamic]:  Setting for emphasizing audio
[Custom]:  Use the custom audio settings saved earlier
You can adjust high volume, low volume, and balance that decide the audio style. 

Adjusting this will store the value as [Sound Style: Custom].

[Surround Sound]

Turns on / off the surround sound.

[Output Select]

[EXT SP]:  Audio will be output from the speaker connected to the EXT SP terminal.
[AUDIO OUT]:  LINE OUT signal of audio will be output from the AUDIO OUT terminal.

[Audio Source]

Either [AUDIO IN / HDMI1] or [AUDIO IN / HDMI2] is selected as the audio source.

[Reset Audio Setting]

Settings will be restored to the factory default settings.

Содержание TH-65BFE1W






















































Отзывы:

Нет отзывов