English
16
Indicator / Control panel
1
2 3
7
5
4
6
Rear side of the TV
Note
●
Location of indicators may vary depending on the
models.
1 Remote control signal receiver
●
Do not place any objects between the TV remote
control signal receiver and remote control.
2 Ambient sensor
●
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Video Menu is set to [On].
3 Power LED
Red:
Standby
Green:
On
Orange:
Standby with some functions (recording,
etc.) active
●
The LED blinks when the TV receives a command
from the remote control.
4 Input mode selection
●
Press repeatedly until you reach the desired mode.
[Main Menu]
●
Press and hold for about 3 seconds to display main
menu.
OK
(when in the menu system)
5 Channel Up / Down
Cursor Up / Down (when in the menu system)
6 Volume Up / Down
Cursor Left / Right (when in the menu system)
7 Mains power On / Off switch
●
Use to switch the mains power.
●
To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
●
[
]
: Standby / On
26 ASPECT
●
Changes aspect ratio.
●
Displays the [Aspect Selection] screen.
[Auto] /
[16:9] / [Just] / [4:3] / [Zoom]
■
[Auto]
The best ratio is selected automatically.
■
[16:9]
*
Directly displays the image at 16:9 without distortion
(anamorphic).
- For Digital Broadcast channels, image will be
displayed based on broadcasted channel aspect
ratio.
Note
●
16:9 Overscan Function only applies for 16:9 input
source
■
[Just]
Displays a 4:3 image full-screen. Stretching is only
noticeable at the left and right edges.
■
[4:3]
Displays the image at the standard 4:3 without
distortion.
■
[Zoom]
Displays a 16:9 letterbox or 4:3 image without
distortion
*
●
Select
[16:9 Overscan]
in
[Screen Settings]
(Video Menu)
.
●
Selects the screen area displaying the image for
16:9 aspect.
[Off] / [On]
.
[On]:
Enlarges the image to hide the edge of the
image.
[Off]:
Displays the image in the original size.
●
Set to [On] if noise is generated on the edge of
the screen.
■
Installing / Removing batteries
Pull open
Hook
Note the correct
polarity (+ or -)
Close
TH_55GX600_640AZ_Eng.indb 16
TH_55GX600_640AZ_Eng.indb 16
4/2/2019 3:45:05 PM
4/2/2019 3:45:05 PM
