manualshive.com logo in svg

Panasonic th-49lf8w, Руководство по эксплуатации

Поделиться
Скачать
Panasonic th-49lf8w Скачать руководство пользователя страница 80

English

80

Adjust clock page

Click [Detailed set up], then [Adjust clock] to display the 

Adjust clock page.

New date field
New time field
Button to update time and date settings

Note

● 

Date and time is displayed as [- -] when  hey are not 

set.

● 

When [Network control] is set to [On] and it is in 

standby mode, date and time display will be blank 

and they cannot be set.

● 

If the  ime becomes incorrect immediately after 

setting the correct time, contact the dealer where you 

bought the Display.

Ping test page

This page makes it possible to check whether the 

network is connected to the DNS server, etc.
Click [Detailed set up], then [Ping test] to display the 

Ping test page.

Enter the IP address of the server to be tested.
Button for conducting the test

Display which appears when the connection was 

successful.

Display which appears when the connection failed.

Command port set up page

Set the port number to be used with command control.
Click [Detailed set up], then [Command port set up] to 

display the Command port set up page.

Input the port number to be used with command 

control.
Setting update button.

Содержание th-49lf8w









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды