63
English
Power on screen delay
You can set the power-on delay time of the displays to
reduce the power load, when you press <Main Power
On / Off switch> to turn on the multiple displays that are
set together.
Set each display’s setting individually.
[Off]:
The display will be turned on at the same
time as <Main Power On / Off switch> is
pressed.
[Auto]:
Sets the delay time automatically according
to the number set for [Display ID].
The delay time is determined by multiplying
[Display ID] x 0.3.seconds.
HJ:KHQ>'LVSOD\,'@LVĺVHFRQGV
[1 to 30]:
Set the power-on delay time (second).
After pressing <Main Power On / Off
switch>, the display will be powered on with
time delay depending on this setting.
Note
Ɣ
During this function is working, the power indicator is
blinking green.
Ɣ
This function also works when the power recovers
from failure or after plugging off and in again the
power cord.
Clock display
Sets to display / hide the clock.
[Off]:
Hides the clock.
[On]:
Displays the clock.
Note
Ɣ
The clock is displayed at the lower left of the screen
when <RECALL> button is pressed.
Ɣ
When [Date and time] is not set, the clock is not
displayed even when [Clock display] is [On]. (see
page 54)
Power on message(No activity power
off)
Sets to show/hide [No activity power off] precautions at
the time the unit is turned on.
[On]:
The warning precautions are shown at the time
of power ON.
[Off]:
The warning precautions are not shown at the
time of power ON.
Note
Ɣ
This setting is enabled only when [No activity power
off] is [Enable] (see page 52).
Power on message(Power
management)
Whether to show/hide an information message that tells
the power has been turned off by Power Management
when the power is set to [On].
[On]:
The information is shown at the time of power
[On].
[Off]:
The information is not shown at the time of
power [On].
Note
Ɣ
This setting is enabled only when “Power
management” function is [On] (see page 51).
Initialization
When both main unit buttons and remote control buttons
are disabled due to the [Button lock], [Controller user
level] and [Controller ID function] settings, set all the
values [Off] so that all the buttons are enabled again.
Press <- (Unit)> together with <RETURN>
and hold for more than 5 seconds.
[Shipping] is displayed and the lock is released when
it disappears.
Shipping
YES
NO
Ɣ
Settings for [Button lock], [Controller user level]
and [Controller ID function] will be back to [Off].
