Noise reduction
Off
Signal
[ Digital ]
HDMI Range
Auto
Noise reduction
Cinema reality
Off
Off
40
Press to select “Noise reduction”.
Press to select “Off”, “Auto”, “Min”, “Mid”, “Max”.
Auto:
Noise reduction will be automatically selected from “Min”,
“Mid” or “Max”.
Noise reduction
Setup for Input Signals
Note:
Noise reduction can be adjusted while a Video or Component signal is being applied.
Sync
Signal
[ RGB ]
Cinema reality
XGA Mode
Auto
Off
1024
×
768
This function operates only during input from PC IN terminal.
Con
¿
rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input
¿
rst is selected.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”
Sync
Press to select the “Sync”.
Press to adjust.
Switches the dynamic range according to the input signal from HDMI terminal.
Video(16-235):
If the input signal is the video range, Example: HDMI terminal output for DVD player
Full(0-255):
If the input signal is full range, Example: HDMI terminal output for personal computer
Auto:
Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.
Note:
This function can be set only for HDMI signal input.
HDMI Range
Press to select “HDMI Range”.
Press to select “Video(16-235)”, “Full(0-255)”, “Auto”.
