Panasonic TH-32EF2U Скачать руководство пользователя страница 8

Страница: 8 / 92

English

■

When using the LCD Display

The Display is designed to operate on 110 - 127 V

AC, 50/60 Hz.
If problems or malfunction occur, stop using

immediately.
If problems occur, unplug the power supply plug.

•

Smoke or an abnormal odour come out from the unit.

•

No picture appears or no sound is heard,

occasionally.

•

Liquid such as water or foreign objects got inside the

unit.

•

The unit has deformed or broken parts.

If you continue to use the unit in this condition, it

could result in fire or electric shock.

•

Unplug the power supply plug from the wall outlet,

and then contact the dealer for repairs.

•

To cut off the power supply to this Display completely,

you need to unplug the power supply plug from the

wall outlet.

•

Repairing the unit yourself is dangerous, and shall

never be done.

•

To enable to unplug the power supply plug

immediately, use the wall outlet which you can reach

easily.

Do not touch the unit directly by hand when it is

damaged.

•

Electric shock could occur.

Do not cover the ventilation holes.

•

Doing so may cause the Display to overheat, which

can cause fire or damage to the Display.

Do not stick any foreign objects into the Display.

•

Do not insert any metal or flammable objects into the

ventilations holes or drop them onto the Display, as

doing so can cause fire or electric shock.

Do not remove the cover (cabinet) or modify it.

•

High voltages which can cause severe electric shocks

are present inside the Display. For any inspection,

adjustment and repair work, please contact your local

Panasonic dealer.

Ensure that the mains plug is easily accessible.
Do not use any power supply cord other than that

provided with this unit.

•

Doing so may cause short-circuit, generates heat,

etc., which could cause electric shock or fire.

Do not use the supplied power supply cord with any

other devices.

•

Doing so may cause short-circuit, generates heat,

etc., which could cause electric shock or fire.

Clean the power supply plug regularly to prevent it

becoming dusty.

•

If there is a build up of dust on the plug, the resultant

humidity may cause short-circuit, which could cause

electric shock or fire. Unplug the power supply plug

from the wall outlet and wipe it with a dry cloth.

Do not handle the power supply plug with wet

hands.

•

Doing so may cause electric shocks.

Securely insert the power supply plug (socket outlet

side) and the power supply connector (main unit

side) as far as it will go.

•

If the plug is not fully inserted, heat may be generated

which could cause fire. If the plug is damaged or the

wall socket is loose, they shall not be used.

Do not do anything that may damage the power

supply cord or the power supply plug.

•

Do not damage the cable, make any modifications

to it, place heavy objects on top of it, heat it, place it

near any hot objects, twist it, bend it excessively or

pull it. To do so may cause fire and electric shock. If

the power cable is damaged, have it repaired at your

local Panasonic dealer.

Do not touch the power supply cord or the plug

directly by hand when they are damaged.

•

Doing so may cause electric shock or fire due to

short-circuit.

Do not remove covers and NEVER modify the

Display yourself

•

Do not remove the rear cover as live parts are

accessible when it is removed. There are no user

serviceable parts inside. (High-voltage components

may cause serious electrical shock.)

•

Have the Display checked, adjusted, or repaired at

your local Panasonic dealer.

Keep the AAA/R03/LR03 batteries (supplied) out of

reach of children. If accidentally swallowed, it will be

harmful to the body.

•

Please contact a doctor immediately in case you

doubt that the child may have swallowed it.

If the Display is not going to be used for any

prolonged length of time, unplug the power supply

plug from the wall outlet.
Picture noise may occur if you connect / disconnect

the cables connected to the input terminals you

are currently not watching, or if you turn the power

of the video equipment on / off, but it is not a

malfunction.

To prevent the spread of fire, keep

candles or other open flames away from

this product at all times.

Содержание TH-32EF2U





























































































Результаты поиска

Содержание TH-32EF2U

Отзывы:

Panasonic TH-32EF2U, Руководство по эксплуатации, Страница: 8 / 92

Результаты поиска

Содержание TH-32EF2U

Отзывы: