Panasonic th-32ef1e Скачать руководство пользователя страница 74

Страница: 74 / 89

English

[Child side]

USB memory contents

filelist.dat
R_Introduction.jpg
R_Contents_Video1.wmv
R_Contents_Video2.wmv
R_Contents_Video3.wmv

filelist.dat (file list)

GroupID:G01

PHOTO_001:R_Introduction.jpg

VIDEO_001:R_Contents_Video1.wmv

VIDEO_002:R_Contents_Video2.wmv

VIDEO_003:R_Contents_Video3.wmv

Play contents

For the above setting example, the following contents

will be played on repeat (loop).
[Parent side]
1. L_Introduction.jpg

(10 seconds)

2. L_Contents_Video1.wmv

(10 seconds)

3. L_Contents_Video2.wmv

(20 seconds)

4. L_Contents_Video3.wmv

(

[Child side]
1. R_Introduction.jpg

(10 seconds)

2. R_Contents_Video1.wmv

(10 seconds)

3. R_Contents_Video2.wmv

(20 seconds)

4. R_Contents_Video3.wmv

(

1: Played for the duration of the play time of L_

Contents_Video3.wmv (Parent side).

■

USB memory contents check

You can run a USB memory contents check in [USB

media player settings] - [Scenario file check]. (see page

49)
If an error is present, the information is given with the

following details.
A(B): C

A: Name of the file with an error
B: Row with an error
C: Error code

Note

●

Shows leading error codes.
Details of the detected errors are as follows.

Error

code

Detail of the error

No USB memory is inserted.

scenario.dat/filelist.dat cannot be opened.

There is an error in the contents of

scenario.dat/filelist.dat.

The play file format is not supported.

No play file exists.

The necessary group ID for Multi Media

Player has not been specified.

There are several identical file definitions.

The scenario’s play time is over the limit.

The file definition listed in the scenario is

not in the file list.

10.

The scenario contains 0 or over 1000 play

files.

11.

There are 0 or over 1000 play files.
(Single Media Player (Type 1) only)

12.

Only the group ID is listed on the file list.

(Multi Media Player only)

Supplementary note

The USB memory contents check does not determine

whether or not a play file is playable.
If a file cannot be played while Media Player is active,

an error message will be displayed.
When performing the synchronized playback on the

Multi Media Player, check in the menu [USB media

player settings] - [Scenario file check] that the file is

playable.

Network environment (Multi Media

Player only)

■

Example of setting up LAN connection and

IP address / Subnet mask

As mentioned below, connect several units together with

LAN cables and set up IP addresses / Subnet masks so

that all the displays exist on the same network.

Parent

IP address:

Subnet mask:

192.168.10.1
255.255.255.0

Child

IP address:

Subnet mask:

192.168.10.2
255.255.255.0

Child

IP address:

Subnet mask:

192.168.10.3
255.255.255.0

Child

IP address:

Subnet mask:

192.168.10.4
255.255.255.0

Содержание th-32ef1e


























































































Результаты поиска

Содержание th-32ef1e

Отзывы:

Похожие инструкции для th-32ef1e

Бренды по названию

Популярные бренды

Panasonic th-32ef1e, Руководство по эксплуатации

Результаты поиска

Содержание th-32ef1e

Отзывы:

Похожие инструкции для th-32ef1e

Бренды по названию

Популярные бренды