Panasonic TH-103PB1U страница 36 Скачать руководство пользователя

Страница: 36 / 66

SCREENSAVER

START

FUNCTION

SCROLLING BAR ONLY

TIME 99:99

MODE

OFF

Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.

FUNCTION selection

Select “SCREENSAVER” in “SETUP” menu and press

button.

Press to select the FUNCTION.

Press to select the desired function.

SCROLLING BAR ONLY

OVERLAY SCROLLING BAR

NEGATIVE IMAGE

WHITE SCREEN

MODE selection

START setting

When the MODE is set to ON, press to select START.

Press to start SCREENSAVER.
The menu screen will disappear and the SCREENSAVER will be activated.

To stop the

SCREENSAVER under ON, press the R button or any buttons on the main unit.
Note:

When the display is turned off, the SCREENSAVER will be deactivated.

Press to select the
MODE.
Press to select each
mode items.

SCREENSAVER

(For preventing image retention)

OFF

INTERVAL

: Operates when SHOW DURATION and SAVER

DURATION are set up and those times arrive.

TIME OF DAY

: Operates when START TIME and FINISH TIME

are set up and those times arrive.

STANDBY AFTER SCR SAVER

: Operates while SCREENSAVER DURATION,

and display enters standby mode.

: Operates when START is selected and the

ACTION ( ) button is pressed.

NEGATIVE IMAGE

: A negative image will be displayed on the screen.

SCROLLING BAR ONLY : A white bar will scroll from left to right. The image won't be displayed.
OVERLAY SCROLLING BAR : The brightness of the image will be decreased and a white bar

will scroll on it.

WHITE SCREEN

: The whole screen will be white.

Содержание TH-103PB1U



































































Результаты поиска

Содержание TH-103PB1U

Отзывы:

Похожие инструкции для TH-103PB1U

Бренды по названию

Популярные бренды

Panasonic TH-103PB1U, Руководство по эксплуатации

Результаты поиска

Содержание TH-103PB1U

Отзывы:

Похожие инструкции для TH-103PB1U

Бренды по названию

Популярные бренды