62
Using FUNCTION button
Assigning functions to the FUNCTION button on the remote control enables a user to switch between
show/hide and modes with just a single touch of a button. The function settings are con gured by
using “FUNCTION BUTTON SETTINGS” in the SETUP menu (see page 57). The button functions are
con gured in two ways depending on the setting (On/Off) of “Studio mode” in the OPTIONS menu.
The factory preset functions are as described below.
FUNCTION 1 Button: 3D SETTINGS
FUNCTION 2 Button: SIGNAL
FUNCTION 3 Button: COLOUR GAMUT
FUNCTION 4 Button: SCROLLING BAR
Display of the FUNCTION button guide
Pressing the FUNCTION button can display the FUNCTION button guide to refer for the function of
each button.
If the guide display is not needed, set “FUNCTION BUTTON GUIDE” in “FUNCTION BUTTON SETTINGS” to “OFF”
(see page 57).
The operation starts.
FUNCTION
1: 3D SETTINGS
2: SIGNAL
3: COLOR GAMUT
4: SCROLLING BAR
3D SETTINGS / SIGNAL / COLOUR GAMUT
Menu is displayed.
(Example: 3D SETTINGS)
ON
3D FUNTION
ON
AUTO
3D INPUT FORMAT
3D SETTINGS
3D COLOR COMPENSATION
NORMAL
LEFT/RIGHT SWAP
3D
3D VIEWING MODE
SAFETY PRECAUTIONS
Pressing the FUNCTION button clears the menu.
SCROLLING BAR / TEST PATTERNS
Con rmation screen (Example: SCROLLING BAR)
YES
N O
FUNCTION
SCROLLING BAR
•
SCROLLING BAR
Activates the SCROLLING BAR ONLY screensaver.
After 15 minutes, the display enters standby mode.
To exit this mode, press any button.
Press to
select
“YES”.
Press.
The operation starts.
•
TEST PATTERNS
Each time you press
, a different test pattern is displayed
(seven in all).
Color Bars
Red
Green
Blue
Frame
(2 lines × 2 dots)
Black
1% window
To exit this mode, press any button other than
.
Note:
PC POWER MANAGEMENT and NO SIGNAL POWER OFF are deactivated during SCROLLING BAR or TEST PATTERNS
operation. (see page 43)
