21
AUDIO ADJUST
1
2
Press to select AUDIO ADJUST.
Press to display the AUDIO ADJUST
screen.
Press to select the sub-menu.
Select the setting listening to the sound.
Press to activate the setting if necessary.
AUDIO ADJUST
NORMAL
MODE
BASS
TREBLE
STEREO
SAP MONO
+ 5
+ 3
AUTO
MODE
MODE
STEREO
SAP
MONO
Function
Two channel audio reception.
Second Audio Programming
(typically used for bilingual audio).
Select when stereo signal is weak.
Notes:
• Red display
: With signal
White display
: No signal
White display (All modes): MONO
• To change the mode using SAP button
(see page 12).
STEREO/SAP/MONO
Notes:
• “NORMAL” means the MODE is in the factory default setting. “NORMAL” changes to “NORMALIZE” when
you change the setting of BASS or TREBLE.
• You can normalize each MODE separately.
MODE
DYNAMIC
MUSIC
AUTO
STANDARD
Function
Gives contrast to sound.
For programs consisting mainly of music. Enhances high sounds (around 4 kHz).
Automatically adjusts for a wide Dynamic Range.
Emits the original sound.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
BASS, TREBLE
You can change the level of each sub-
menu (BASS and TREBLE) for each
MODE (AUTO, STANDARD, DYNAMIC
and MUSIC) according to your personal
preference.
Sub-menu
BASS
TREBLE
Function
Adjusts low frequencies.
Adjusts high frequencies.
NORMAL/NORMALIZE
Press to select
NORMALIZE.
Press OK.
•
To reset to standard setting :
AUDIO ADJUST
NORMALIZE
MODE
BASS
TREBLE
+ 5
+ 1
AUTO
Press the MENU button to display the MENU screen and select ADJUST.
