Panasonic TC-L39EM6X, Руководство по обслуживанию

Страница: 7 / 56

(4) Adjustment instruction
At any input source then press the
“←
”, “EXIT” and “OK” (
using RC within 1 sec
) to enter factory mode
During Factory menu, if “EXIT” key is pushed, system will exit factory mode.
4-1. Auto Gamma Adjustment & Check
4-2.1. Set into factory mode then choose Auto Gamma Adjust,
4-2.2. Press "2" "3" "2" "4" in turn within 1sec to enter the item, and push Init will self-generate gray pattern
for adjusting.
4-2.3. Following the Cool spec as bellow.
Color Cool
100IRE 0.2662
x
50IRE 0.2658
100IRE 0.2667
y
50IRE 0.2654
Adjust
Tolerance
±0.005
(1) Adjust 100IRE
First, Decrease G to meet y spec(0.2667).
Second, Decrease R to meet x spec(0.2662).
(2) Adjust 50IRE
First, Decrease G to meet y spec(0.2654).
Second, Decrease R to meet x spec(0.2658).
Note: Do not adjust the B GAIN on both 100IRE and 50IRE.
When match the spec, pressing “Save” then exit the adjustment page.
(
3
) When match the spec, pressing right key in "Save" position then exit the adjustment page.
4-2.4. Exit Factory Mode:
After finish Gamma adjust press [EXIT] to exit factory mode.
7