Panasonic TC-L39EM6X, Руководство по обслуживанию

Страница: 22 / 56

22
Digital TV (ATSC / Open-Cable) Demodulator

Compliant with ATSC digital television standard

Supports SCTE DVS-031 and ITU J.83 Annex B digital CATV standard

Accept direct IF (44 MHz or 43.75 MHz) and low IF (5.38 MHz)

NTSC interference rejection capability

Meet all ATSC/A74 requirements

Excellent adjacent and co-channel rejection capability

Dual digital AGC controls for IF and RF, respectively

Full-digital frequency offset recovery with wide acquis ition
range

500KHz for ATSC and

250 kHz for CATV
reception

EIA/CEA-909 antenna interface, both mode A and mode B are
supported

Embedded SAW filter and IF Amplifier. Cost effective TV front-end
structure and no more cost on:

External analog IF demodulator

External SAW filter and IF VGA on tuner
Peripherals

Seven basic serial interfaces: one is for the tuner, three are the masters
for general purpose and two of them can
be active in stan dby mode, one is the slav e for VGA DDC,
the
other two extra slave serial interfaces used for
HDMI EDID data

Five PWMs, two of them can be active in standby mode

IR receiver

Real-time clock and watchdog controller

Built-in 2-link USB2.0/1.1, both of them support external hub with 16
endpoints.

Built-in uP for standby mode

Supports SDIO interface

Supports smart card interface

Supports two serial flash or one serial and one NAND flash

Supports 2-input low-speed ADC

Supports boundary scan (JTAG)
IC Outline

LQFP Package 216 pins with E-pad

3.3V/1.2V and 1.8V for DDR2 or 1.5V for DDR3