English
12
Installing the wall-
hanging bracket
Please contact a professional installer to purchase
the recommended UL qualified wall-hanging bracket.
For additional details, please refer to the wall-hanging
bracket installation manual.
Accessories (wall-hanging parts)
Spacer nut (2)
■
Preparation
A
When changing to installation with pedestal, remove the
spacer nut.
●
To remove the spacer nut, use a spanner or the like.
Back of the TV
Holes for wall-hanging
bracket installation
(for 55 ”)
11.8 ” (300 mm)
11.8 ” (300 mm)
(for 65 ”)
15.7 ” (400 mm)
11.8 ” (300 mm)
(View from the side)
Diameter of screw: M6
A
*
*
*
: Depth of screw
Upper side
Minimum: 0.39 ” (10.0 mm)
Maximum: 0.63 ” (16.0 mm)
Lower side
Minimum: 0.31 ” (8.0 mm)
Maximum: 0.51 ” (13.0 mm)
Screws for attaching the TV to the
wall-hanging bracket (not supplied
with the TV)
Warning
●
Always be sure to ask a qualified technician to carry
out set-up.
●
Do not mount the unit directly below ceiling lights
(such as spotlights, floodlights or halogen lights) that
typically give off high heat. Doing so may warp or
damage plastic cabinet parts.
●
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
●
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
●
Incorrect wall-hanging bracket or incorrect fitting may
cause equipment to fall, resulting in injury and product
damage.
●
Panasonic disclaims liability for any damage or
injury arising from incorrect wall-hanging bracket,
incorrect fitting or otherwise failure to follow the above
instructions.
