Panasonic TC-20G12P, Руководство по обслуживанию

Страница: 11 / 42

- 11 -
Operation
Adjusting the image
This TV set has 4 pre-adjusted image
menus:
DINAMIC , NORMAL , SOFT and
GAME . Within each of these menus it is
possible to change image configuration
according to your preference. If a return to
the default factory values is desired, select
YES in the NORMAL IMAGE item of the
image menu.
Image menu adjustment
1. Press the ACTION button to display the
main menu.
2. Use CHANNEL buttons (
$
or
4
) or
VOLUME buttons (
“
or
”
) to select the
menu PICTURE .
3. Press the ACTION button again to
display the ADJUSTMENT menu, as
shown in the illustration.
4. Use the VOLUME buttons (
“
or
”
) to
select one of the options: DINAMIC ,
NORMAL , SOFT , or GAME .
5. Press the ACTION button twice to exit
the adjustment menu.
Adjusting color, hue, brightness, contrast
and sharpness
1. Press the ACTION button to display the
main menu.
2. Use CHANNEL buttons (
$
or
4
) or
VOLUME buttons (
“
or
”
) to select the
menu PICTURE .
3. Press the ACTION button again to
display the image adjustment menu.
4. Use the CHANNEL buttons (
$
or
4
) to
select the desired image function (color,
hue, brightness, contrast and
sharpness).
5. Use the VOLUME buttons (
“
or
”
) to
adjust the value for the selected image
function.
6. Repeat steps 4 and 5 to change the
remaining image functions.
7. Press the ACTION button twice to exit
the image adjustment menu.
Image normalization
When pressing either of the VOLUME
buttons while the image normalization
adjustment (
NORMAL IMAGE ) is selected, all
image adjustment values return to the
preset factory values.
It may be that while adjusting contrast and
brightness to minimum values, the
displayed menu becomes too dark. If this
happens, press the
ACTION and POWER
(on the TV set panel) buttons
simultaneously for at least 5 seconds. By
doing this, all values already configured by
the user, such as clock, color and channel
color system, are reset to the original
factory settings.
Operation
Blue screen (BLUE BACK)
This function, when activated, displays a blue screen when the selected channel does not
have any signal or also in AV mode with no signal (for example: the VCR connected to the
AV input terminal is turned off.). This function avoids the display of white noise in the screen
(“drizzle”).
1. Press the ACTION button to display the
main menu.
2 Use the CHANNEL buttons (
$
or
4
) or
VOLUME buttons (
“
or
”
) to select the
SETUP menu.
3. Press again the ACTION BUTTON to
display the ADJUSTMENT menu, as
shown in the illustration at right.
4. Use the CHANNEL buttons (
$
or
4
) to
select the COLOR TEMPERATURE
function.
5. Use the VOLUME buttons (
“
or
”
) to
select between BLUE , NORMAL , or RED ,
according to preference.
6. Press the ACTION button twice to exit
the adjustment menu.
Adjusting COLOR TEMPERATURE
Use this function to adjust the color tint to red, blue or normal.
1. Press the ACTION button to display the
main menu.
2. Use the CHANNEL buttons (
$
or
4
) or
VOLUME buttons (
“
or
”
) to select the
SETUP menu.
3. Press again the ACTION button to
display the ADJUSTMENT menu, as
shown in the illustration at right.
4. Use the CHANNEL buttons (
$
or
4
) to
select the BLUE BACK function.
5. Use the VOLUME buttons (
“
or
”
) to
select between ON or OFF .
6. Press the ACTION button twice to exit
the adjustment menu.
TC-20G12P / TC-29G12P / TC-29G12PU
Operation Guide