6
Remote control battery installation
1. Open the battery cover.
3. Replace the cover.
Requires two AA batteries.
Two AA size
Notes:
• Do not drop, apply shock to or step on the remote control.
• Do not spill water on the remote control.
• Do not place objects between the remote control and remote control receiver.
• Do not use remote controls for other equipment at the same time.
• If the TV does not operate even when using the remote control from a close range, it is time to replace
the batteries.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environmentally friendly manner.
1. Always use new batteries when replacing the old set.
2. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3. Battery replacement is necessary when remote control acts sporadically or fails to operate this unit.
2. Install the batteries.
Note the correct polarity (+ and -).
Check the accessories before installation.
• Operating Instructions
• Remote Control
Transmitter
(EUR7613Z90R)
SUPPLIED ACCESSORIES
• Batteries for the
Remote Control
Transmitter
(2
×
AA size)
• Warranty Card
• F-Type Antenna Connector
(for 4C-2V) (
×
1)
• Product Registration Card and
Customer Care Plan Card (For
U.S.A.)
