9 | P a g e
© Nextiva, All Rights Reserved
10.
Click
Save & Continue
. A pop-up message appears confirming that the transaction has been
processed
(Figure 3-5)
.
Figure 3-5: Confirmation Message
Checking the Firmware
Before attempting to provision a Panasonic KX-HDV130 phone using the instructions below, make sure
that the phone is on firmware version 2.040 or higher. If it is on an older version of the firmware, the
phone may fail to register or be unable to make/receive calls.
1.
From the main screen of the phone, select
Menu
Basic Settings
Other Option
Embedded Web
On
. The phone will beep, indicating Embedded Web is now on.
2.
Press the
Back
softkey (left softkey) twice to go back to the main menu.
3.
Select
System Settings
Status
IPv4 Settings
IP Address
. Record the IP Address that
appears on the screen.
4.
Use your
web browser
to navigate to the IP Address of the phone
(Figure 3-17)
.
Figure 3-17: Navigate to the IP Address
5.
Enter
admin
as the username and
adminpass
as the password
(Figure 3-18)
.
Figure 3-18: Log in to the Phone Interface