10
Power port
Connect the supplied power cord to this port and connect the other end into an
electric outlet.
Power cord hook block
If the supplied power cord is hanged to this block, the cord becomes hard to pull
out from the power port.
Ground terminal
Only qualified personnel should install minimum 18AWG green-and-yellow stranded
copper wire to Ground terminal screw.
10/100/1000BASE-T port (ports 1–8)
Devices such as 10/100/1000BASE-T terminal, hub, repeater, bridge, and Switching
Hub can be connected to this port. Install the device so that the length of twisted
pair cable (CAT5e or above) becomes 100 m or less.
SFP extension slot (port 9)
Install SFP extension module here.
SFP port supports only the full duplex communication.
Use our optional RJ45-DSub 9-pin console cable (PN72001) for the console cable.
Console port
Transmission mode : RS-232C
Transmission speed : 9,600 bps
Stop bit
: 1 bit
Flow control
: None
Emulation mode
: VT100
Data length
: 8 bits
Parity control
: None
Transmission connector : RJ45
Front panel
Back panel
Enlarged view on the next page
Explanation label
10/100/1000BASE-T port
Console port (RJ45)
LED display change button
SFP extension slot
t
r
o
p
r
e
w
o
P
l
e
b
a
l
r
e
b
m
u
n
l
a
ir
e
S
l
a
n
i
m
r
e
t
d
n
u
o
r
G
Power cord hook block
Part Names and Functions
2
MAC address label
