64
Before Requesting
Service
Power
1:
The SD Video Camera power cannot
be turned on.
1-1: Is the power source connected
correctly?
1-2: Is the Battery fully charged? Charge it
with the AC Adaptor.
2:
The SD Video Camera power shuts
off automatically.
2:
If you do not use the SD Video Camera
for more than 5 minutes, the power
shuts off automatically to save the
Battery power.
3:
The SD Video Camera power does
not stay on long enough.
3:
Is the Battery low? Charge the Battery
or attach a fully charged Battery.
Battery
1:
Battery runs down quickly.
1-1: Is the Battery fully charged? Charge it
with the AC Adaptor.
1-2: Are you using the Battery in an
extremely cold place? In cold places,
the operating time of the Battery
becomes shorter.
1-3: Has the Battery worn out? If the
operating time is still short even after
the Battery is fully charged, the Battery
has worn out.
Recording
1:
Recording does not start although
power is supplied to the SD Video
Camera and the Memory Card is
correctly inserted.
1-1: Is the SD Video Camera turned on?
1-2: Is the write-protect switch set to
[LOCK]? Being set to [LOCK], the
Memory Card cannot be recorded.
1-3: Does the Memory Card have enough
free space? Delete useless data in the
Memory Card.
Playback
1:
Recorded still pictures are not clear.
1:
Is [Quality] on the menu set to
[Normal]? If recording is done with it
set to [Normal], images with fine details
may include a mosaic-like pattern. Set
[Quality] to [Fine].
2:
Playback images do not look
normal.
2:
The picture may be damaged. In order
to prevent the loss of image data,
backing up on a personal computer is
recommended.
3:
Actual recording time/still image
storage capacity in the Memory
Card is different from those
described in these Operating
Instructions drastically.
3-1: Actual recording time/still image
storage capacity depends on the kind
of the image.
3-2: When MPEG4 moving picture data, still
picture data, sound data, and audio
data are recorded in the Memory Card,
less capacity in the Memory Card can
be used.
4:
While playing back a Voice file or a
Music file, the LCD Monitor is
suddenly turned off.
4-1: The LCD Monitor is automatically
turned off approx. 5 seconds after
starting playing back or recording a
Voice file. When opening and closing
the LCD Monitor, it will turn on again.
However, in the case of not conducting
any operation for approx. 5 seconds,
the LCD Monitor is turned off again.
(The LCD Monitor is on while stopping
playback (or pausing).)
4-2: When the [Power save] mode is set to
[On], the LCD Monitor is turned off
5 seconds after starting playback of a
Music file.
AV50UK_ENG.book 64 ページ ２００４年１月２６日 月曜日 午前１０時３６分
