Panasonic SV-AV10 Скачать руководство пользователя

Страница: 7 / 44

Inserting a Card

Slide the Card Slot Cover

, and flip it to open.

≥

Turn off the SD Multi AV Device before inserting a Card.

Hold the Memory Card placing the cut off corner

at the

left and showing the label

frontward, and then insert it

fully until it clicks.

After the Memory Card is set, close the Card Slot Cover

Removing the Card

Open the Card Slot Cover and push the top of the Card. The Card
will pop up a little and allow you to pick it up with your fingers to
remove.

≥

While the Card Access Lamp

is on, the following operations

should

not

be attempted: (Such action will damage the Card, cause loss of

recorded data and cause the SD Multi AV Device to malfunction.)

Open the Card Slot Cover.

Remove or insert the Card.

Operate your SD Multi AV Device.

Remove the battery or unplug the power cable.

Apply vibration or shock.

≥

Only an SD Memory Card or a MultiMediaCard can be used for this SD
Multi AV Device.

≥

Do not touch the terminals on the back of the card with your fingers.

≥

If the Card Slot Cover is not closed completely, remove the Memory
Card and re-insert it.

≥

Electrical noise, static electricity or failure of the SD Multi AV Device or
the card may damage the card or erase the data stored on the card. It
is recommended to save important data onto a personal computer.

Using the LCD Monitor

Record and play the video image while viewing the LCD Monitor.

Put your finger on the protrusion

to open the LCD

Monitor.

Adjust the LCD Monitor angle according to the desired
recording/playing angle.

≥

The LCD Monitor can rotate a maximum of 180

from the

vertical position to the upward direction and a maximum of 90

to the downward direction. Forcefully rotating the LCD Monitor
beyond these ranges will damage the SD Multi AV Device.

≥

If [UPSIDE-DOWN] is selected for [LCD MONITOR] under the [OTHER
FUNCTIONS] menu the picture will be displayed upside down.

≥

Do not carry or store the SD Multi AV Device with the LCD monitor
facing upward. Otherwise, the LCD monitor may be damaged.

Removing the Card

Inserting a Card

OPEN

SDV1U.book 7 ページ２００２年２月１５日金曜日午後９時４４分

Содержание SV-AV10













































Результаты поиска

Содержание SV-AV10

Отзывы:

Похожие инструкции для SV-AV10

Бренды по названию

Популярные бренды

Panasonic SV-AV10, Руководство по эксплуатации

Результаты поиска

Содержание SV-AV10

Отзывы:

Похожие инструкции для SV-AV10

Бренды по названию

Популярные бренды