2 Selecting the desired focus area and
saving a picture
1 Recording with [Post Focus]
2 Selecting pictures from 4K burst fi le and saving
To record the subject with reduced blur
Set the mode dial to [S].
Set the shutter speed by rotating the rear dial or the front dial.
Approximate shutter speed for outdoor recording in fi ne weather conditions: 1/1000 seconds or faster.
The ISO sensitivity becomes higher. This may result in more visible noise on the screen.
Adding markers to select and save pictures ([4K Burst(S/S)] only)
You can add markers if you press [Fn1] during recording. You can skip to the positions where you added markers on the slide view screen or 4K
burst playback screen.
Press [
1
].
Press the cursor buttons
2
/
to select a 4K burst fi le.
4K burst fi les are displayed with [
].
Press the cursor button
3
.
The slide view screen for selecting pictures will be displayed.
Drag the frames to select the frame you want to save as a picture.
4
You can display the previous or next 45 frames in slide view by touching [
]/[ ] ([4K Burst]/[4K
Burst(S/S)] only).
Fn1
Fn3
When a fi le with long burst time is selected ([4K Burst]/[4K Burst(S/S)] only):
We recommend that you make a rough selection of scenes using the 4K burst playback screen fi rst, and then select the frame you want to save as a
picture using the slide view screen.
Fn1
Fn3
Press [Fn3] to display the 4K burst playback screen.
Press the cursor button
to start continuous playback.
You can start continuous rewind by pressing
. To pause the rewind operation, press
again.
You can start fast rewind/forward during continuous playback by pressing
/
. To return to continuous playback, press
.
Press the cursor button
to pause at the scene you want to save as a picture.
Press [Fn3] to display the slide view screen.
Press [MENU/SET] to save the picture.
5
You can also perform the same operation by touching [
].
The picture will be saved in JPEG format.
The camera can perform Burst recording in the same picture quality as 4K photo recording while automatically shifting the focus to different areas.
After the recording, you can select the desired area on the screen and save a picture in which the selected area is in focus. This function is suited for
recording still objects.
Select multiple frames from 4K burst fi les recorded in 4K Photo mode that you wish to combine. Parts of the image that are
brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture.
Refer to the “Basic Operating Instructions” for details.
Saving a picture by selecting a focus point after recording ([Post Focus])
Superimposing brighter parts of frames and combining them into one picture
([Light Composition])
Press [
1
].
Press the cursor buttons
2
/
to select [ON]
and then press [MENU/SET].
Decide on the composition, and press the
3
shutter button halfway.
Press the shutter button fully to start recording.
4
Cancelling [Post Focus]: In step
2
, select [OFF].
Select an image with the [
1
] icon
on the playback screen, and press
the cursor buttons
.
Select and touch a focus area.
2
Touch [
3
] to save the picture.
The picture will be saved in JPEG format.
Fn1
MC262̲SQC0410̲4KPHOTO̲EB̲eng.indd 2
MC262̲SQC0410̲4KPHOTO̲EB̲eng.indd 2
2016/03/17 20:04:45
2016/03/17 20:04:45
