3
‘
Accessories
Check the supplied accessory before using this
system.
1 Remote control (with a battery)
(N2QAYC000133)
1 AC power supply cord
(K2CA2CA00025)
1 AC adaptor
(TXH0016AA)
• Product numbers are correct as of June 2020. These may be
subject to change.
• For U.S.A.: To order accessories, refer to “Limited Warranty
(ONLY FOR U.S.A.)” (Basic Owner’s Manual).
• For Canada: To order accessories, call the dealer from whom
you have made your purchase.
• Do not use AC power supply cord and AC adaptor with other
equipment.
• Do not use any other AC power supply cord and AC adaptors
except the supplied one.
Unit care
∫
Clean this system with a soft, dry cloth
• When dirt is heavy, wring a cloth moistened in water tightly
to wipe the dirt, and then wipe it with a dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
system.
• Before using chemically-treated cloth, carefully read the
instructions that came with the cloth.
∫
To dispose or transfer this system
This system may keep the user settings information in this
system. If you discard this system either by disposal or
transfer, then follow the procedure to return all the settings to
the factory presets to delete the user settings.
• The operation history may be recorded in the memory of this
system.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
≥
Reorient or relocate the receiving antenna.
≥
Increase the separation between the equipment and receiver.
≥
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
≥
Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded interface
cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Supplier’s Declaration of Conformity
Trade Name: Panasonic
Model No.: SC-HTB01
Responsible Party: Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: http://shop.panasonic.com/support
THE FOLLOWING APPLIES ONLY IN CANADA.
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
Model: SC-HTB01
IC: 216A-SCHTB01
CAN ICES-3(B)/NMB-3(B)
THE FOLLOWING APPLIES IN THE U.S.A.
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
Conforms to UL STD 62368-1.
Certified to CAN/CSA STD C22.2 No.62368-1.
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to
the English display on the unit.
