Panasonic SLPR300 - CD RECORDER, Руководство по обслуживанию

Страница: 7 / 88

Notes
- The unit can playback audio data recorded on CD-G, CD-EXTRA
and CD-Text discs as well, however the text information of CD-
Text discs cannot be displayed.
- If a CD-R or CD-RW has been recorded using a personal computer,
playback is only possible if the disc is recorded in the CD-Digital
Audio format.
- You can play CD-R and CD-RW discs recorded in the music CD
format.
Some of them, however, may not be played depending on the disc
characteristics or recording condition.
- Do not use a CD-R or CD-RW disc that has been recorded in any
format other than the music CD format or a CD-RW disc that has
been used in any format other than the music CD format with this
unit. Using such a disc with this unit may cause loudsound to
damage the speakers or cause hearing disorder.
5. Location of Controls
6. Preventing static electricity
Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric,
etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to
prevent this when performing repairs.
6.1. Grounding to prevent damage by static electricity
Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as
CD players.
Be careful to use proper grounding in the area where repairs are being performed.
6.1.1. Ground the workbench
1. Ground the workbench by laying conductive material (such as a
conductive sheet) or an iron plate over it before placing the
traverse unit (optical pickup) on it. (Refer to Fig. 6-1.)
6.1.2. Ground yourself
1. Use an anti-static wrist strap to release any static electricity built
up in your body. (Refer to Fig. 6-1.)
Fig. 6-1
7