Panasonic SL-SV590EG, Руководство по обслуживанию

Страница: 15 / 36

S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Main P.C.B. ........................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S3.1.1. Overall Block Diagram (1) .................................................. S-3
S3.1.2. Overall Block Diagram (2) .................................................. S-4
S4. Schematic Diagram .................................................................. S-5
S4.1. Interconnection Diagram ....................................................... S-5
S4.2. Main Schematic Diagram ...................................................... S-6
S5. Print Circuit Board .................................................................. S-10
S5.1. Main P.C.B. ......................................................................... S-10
S6. Replacement Parts List .......................................................... S-15
S7. Exploded View ....................................................................... S-19
S7.1. Frame and Casing Section.................................................. S-19
S7.2. Traverse Unit Parts Location ............................................... S-20
S7.3. Packing Section (Except SL-SV590GN) ............................. S-21
S7.4. Packing Section (SL-SV590GN) ........................................ S-22
Table of contents
Service Manual
Portable CD Player
AD0604011CE
Diagrams and Replacement
Parts List
Colour
(S)...........Silver Type
SL-SV590EB
SL-SV590EG
SL-SV590GC
SL-SV590GN
SL-SV590GT
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
6.Use the parts number indicated on the Replacement Parts List .
COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
7.Indication on Schematic diagrams:
OFTR FEP
Circuit name being connected.
Name of Signal
This signal is connected
to the FEP schematic diagram.
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice