A
Location of controls/Connection to other equipment
Turn off this unit and the other equipment before connection.
4
∫
To Battery case terminal
(EXT BATT)
Audio system
Adjust the volume level
on the audio system.
AC adaptor
Household AC outlet
External battery case
Car power adaptor
(SH-CDC9)
(not included)
≥
You can recharge the batteries
with this connection.
Some cannot
be connected.
Car audio
To CD or AUX
terminals
Audio cable
(not included)
Car stereo cassette adaptor
(SH-CDM10A) (not included)
∫
To Headphone jack
≥
Set the unit’s volume to 10.
≥
Turn the operation tones off so they
are not heard when operating the
remote control.
≥
Set the unit’s volume to 10.
≥
1 Wired remote control: N2QCBD000028
≥
1 Magnetic adaptor: RFA2108-S
≥
1 AC adaptor: RFEA415C-1S
≥
1 External battery case: RFA1821-H
≥
2 Nickel-metal hydride rechargeable batteries
°
≥
1 Battery carrying case: RFC0062-X
≥
1 pair of stereo earphones: L0BAB0000170
Check the packing carton for these accessories.
Use numbers indicated when asking for replacement parts.
(Only for U.S.A.) To order accessories contact 1-800-332-5368 or the website
(http://www.panasonic.com).
°
Recommended replacement:Nickel-metal hydride rechargeable batteries (HHF-AZ01)
To Headphone jack
Playing WMA and MP3
This unit can play WMA/MP3 files you have recorded to discs.
MP3: MPEG Layer-3 audio decording technology licenced from
Fraunhofer IIS and Thomson multimedia.
HOLD
This function causes the unit to ignore, accidental button presses.
Set to HOLD so the unit doesn’t power on accidentally or play is
interrupted.
∫
The unit and remote control each have independent HOLD switches.
Note on CD-R and CD-RW
This unit can play CD-R and CD-RW recorded with CD-DA or
WMA/MP3. Use an audio recording disc for CD-DA and finalize
§
it
when you finish recording. The unit may not be able to play some
discs due to the condition of the recording.
§
A process performed after recording that enables CD-R/CD-RW
players to play audio CD-R and CD-RW.
Resume function
The player stores the track where you stopped play. Replacing the
disc cancels the function.
Auto power off function
If the unit is left in stop mode for approximately 10 minutes, the unit
powers itself off automatically.
Key illumination
When HOLD is released, the unit’s buttons light in different ways to
indicate the operation.
∫
The color shows the track type playing: green for CD-DA, red for WMA, and orange for
MP3.
∫
To turn the illumination off, set to HOLD.
The display light
The light in the remote control’s display comes on for about
5 seconds when you press a button, unless the hold function is on.
Magnetic adaptor
This adaptor allows you to quickly and easily connect and disconnect
the AC adaptor. This also allows for smoother recharging.
Main unit
Remote control
Rechargeable battery
compartment
Hold switch
Headphone jack
Open switch
Skip/Search
Play/
Pause
Stop /Operation off
Volume control
Display panel
Volume control
Volume control
Play/Stop/
Operation off
Skip/Search
Skip/Search
Tone selection
Play mode selection
Program/Recall/Display
Earphones
Hold switch
Lens
∫
To Magnetic adaptor terminal
Magnetic
adaptor
Displays
HOLD
The HOLD function is on (
➪
left).
NODISC
≥
You haven’t inserted a disc or it isn’t inserted correctly.
≥
You have inserted a disc this unit cannot play.
OPEN
The disc lid is open.
F
Full: The program already contains 20 tracks.
CHARGE
The batteries are recharging. Recharging is complete when this disappears.
N
Reading WMA/MP3 files.
Supplied Accessories
∫
To DC IN jack
