44
© Panasonic Industrial Devices SUNX Co., Ltd. 2012 MJEC-SF4B01V2 No.0027-44V
English
<Mounting of the bottom cap cable (optional)>
CAUTION
! Do not lose any screws during extension / dismantling.
! The bottom cap cables are distinguished with the color of the connectors, the color of
the connector for emitter is gray and that of the receiver is black. Connect the cable to
emitter and receiver without fail using their colors as the guide
! The packing is attached to the connector of the bottom cap cable.If the packing is not
=} _ j {j{} ]
device.
.
CAUTION
When this device is used as a safety equipment for press machines or shears (paper
shears) in Japan, be sure to use the cable with protective tube
SFPB-
_ `
1. Insert the connector of the bottom cap cable (optional) into the connector of this device.
j} j[[
2. Tighten the two M2.6 screws. The tightening torque should be 0.3N·m or less.
Bottom cap cable (Optional)
Cable
This device
Connector
Connector
Groove
M2.6 screw
Enclosed with the
bottom cap cable
