43
© Panasonic Industrial Devices SUNX Co., Ltd. 2012 MJEC-SF4B01V2 No.0027-44V
English
2 Set the rear mounting bracket that is ready for set-
ting to the mounting surface using two hexagon-
socket head bolts [M8 (purchase separately)].
/&+!$+ #* +! ?&';Y&&++![
1. Loosen the hexagon-socket head bolt [M4 (length: 12mm)] screw of the intermediate
supporting bracket
MS-SFB-2
.
& ~[] __j } {
hexagon-socket head bolt [M4 (length: 12mm)]. The tightening torque should be 1.2N·m
or less.
j] __j [}
the four pits and projectiles of both side surfaces of the main body to those of both side
surfaces (inner surfaces) of the intermediate supporting bracket.
3. After aligning the beam axis, mount the intermediate supporting bracket to the mounting
surface using two hexagons-socket head bolts [M5 (purchase separately)].
Intermediate supporting racket
MS-SFB-2
(Accessory)
Hexagon-socket head bolt
[M4 (Length: 12mm)]
This device
Fit the pits and projectiles of both side surfaces
of this device to those of both side inner sur-
faces of the intermediate supporting bracket.
This device
Hexagon-socket head
bolt (M8)
(Purchase separately)
This device
Hexagon-socket
head bolt (M8)
Purchase
separately
