Panasonic SDR-S45EG, Руководство по обслуживанию

Страница: 67 / 105

S-54
INITIAL/LOGO ABBREVIATIONS
MCLK Memory Serial Command Clock
MD Modulation
MD0-7 Microprocessor Data
MDATA Memory Serial Command Data
MDQ0- Memory Data Input/Output
MDQM Memory Data I/O Mask
MDT0-7 Microprocessor Data
MENB Focus Motor Enable
MFF Manual Focus Far
MFN Manual Focus Near
MHSYNC Monitor Horizontal Sync Signal
MIX N.R.D. Non Rec Data Mix
MLD Memory Serial Command Load
MOD Modulation
MOUT MIC Out
MPEG Moving Picture Image Cording Experts Group
MRST Focus Motor Reset
MSB Most Signal bit
MVSYNC Monitor Vertical Sync Signal
N N/F Near/Far Focus
N/P NTSC/PAL
NC No Connection
NCLR Power ON Reset
NCP1 Clamp Pulse
NCP2+VDH Clamp Pulse + Horizontal Drive Pulse
NCP2+VDM Clamp Pulse + Gate Pulse
NDE Non Liner De-Emphasis
NLE Non Liner Emphasis
NR Noise Reduction
NRD Non Rec Data
NRD BLK Non Rec Data Blanking
NRD CLK No Rec Data Clock
NRE Read Enable Input (Low Active)
NWE Write Enable (Low Active)
O OB Optical Black
OBCNT Optical Black Control
OBREF Reference Voltage for Optical Black Control
ODC Optical Disc Controller
OE Output Enable
OFH Horizontal Counted Down Clock Signal (Reference)
OFS Offset
OFTR OFF Tracking
OP Operation AMP Output
OSCI Oscillator Input
OSCO Oscillator Output
OSD On Screen Display