Panasonic SD XC WV-SFN480, Руководство по эксплуатации

Страница: 64 / 232

[Camera title on screen]
Select “On” or “Off” to determine whether or not to display the camera title on the screen. When “On” is selected,
the character string entered for “Camera title on screen (0-9, A-Z)” will be displayed at the position selected
for “OSD”.
•
Default: Off
[Camera title on screen (0-9, A-Z)]
Enter a character string to be displayed on the image.
•
When “Quad stream” is selected for “Image capture mode”, the characters configured for “Ch1” to “Ch4”
are displayed on each stream screen.
•
When “Quad stream” is selected for “Image capture mode”, the characters configured for “Ch1” to “Ch4”
are displayed on each of the 4 images for Quad stream.
•
When “Double Panorama” is selected for “Image capture mode”, the characters configured for “Ch1” and
“Ch2” are displayed on each of the 2 images for Double Panorama.
•
When “Fisheye”, “Panorama”, or “Single PTZ” is selected for “Image capture mode”, the characters
configured for “Ch1” are displayed.
•
Available number of characters: 0 - 20 characters
•
Available characters: 0-9, A-Z and the following marks.
! " # $ % & ' ( ) * + , - . / : ; = ?
•
Default: None (blank)
[OSD] - [Position]
Select the position where the time and date and a character string to be displayed on the image of the “Live”
page.
•
Upper left: The above information will be displayed at the upper left corner of the main area on the
“Live” page.
•
Lower left: The above information will be displayed at the lower left corner of the main area on the
“Live” page.
•
Upper right: The above information will be displayed at the upper right corner of the main area on the
“Live” page.
•
Lower right: The above information will be displayed at the lower right corner of the main area on the
“Live” page.
•
Default: Upper left
[Brightness status display]
Select “On” or “Off” to determine whether or not to display the status of brightness on images displayed on the
“Live” page when adjusting brightness.
•
Default: On
[Upside-down]
Select “On” or “Off” to determine whether or not to turn the image upside-down.
•
Default: Off
IMPORTANT
•
If the “Upside-down” setting is changed when the following area settings are configured, perform the
area setting again.
–
Privacy zone (
®
page 121)
–
VMD area (
®
page 143)
–
VIQS area (
®
page 123)
–
Mask area (
®
page 112)
•
If the “Upside-down” setting is changed when a preset position is configured, the preset position must
be configured again. (
®
page 115)
64 Operating Instructions
10 Configure the basic settings of the camera [Basic]