Panasonic SD XC WV-SFN480, Руководство по эксплуатации

Страница: 89 / 220

11.4 Configure the settings relating to the camera
operations [Cam. Function]
Click the [Cam. Function] tab on the “Image/Audio” page. (
®
page 56, page 58)
Configure the settings relating to camera operations.
IMPORTANT
•
This function is available when a “Image capture mode” setting containing Quad PTZ or Single PTZ is
selected. (
®
page 9) Specifically, the following options can be selected for “Image capture mode”.
Quad PTZ/ Single PTZ/ 8M F Quad PTZ/ 4M F Quad PTZ/ Quad stream
[Self return]
When the time set for “Self return time” has passed after manual operations of the camera, the camera will
automatically be in the selected mode.
•
Off: Self return is not performed.
•
Home position: When the set time has passed, the camera will move to the home position automatically.
In Quad PTZ screen, all 4 images are moved to the home position.
•
Auto pan: When the set time period has elapsed, the camera will start automatic panning. In Quad PTZ
screen, auto pan only operates on the top left image, and other images are returned to the home position.
–
When “<Ceiling>” is selected for “Image capture mode”: The camera rotates 360° to the right from the
present position in endless mode.
–
When “<Wall>” is selected for “Image capture mode”: The camera moves in the horizontal direction
from the present position, and rotates in the opposite direction from the endpoint in endless mode. The
camera stops for 5 seconds at the endpoint.
•
Preset sequence: When the set time period has elapsed, the camera will start the sequence display.
The camera automatically moves to the preset positions in sequence starting from the lowest preset
position number.
The camera stops at the preset position for the specified length of time.
Once the camera has moved to the last preset position, it starts from the first preset position again.
In Quad PTZ screen, the images in all the 4 screens are moved in the preset sequence at the same time.
In this case, the following preset numbers are displayed.
–
Top left image: preset number 1
®
5
®
9
®
13
–
Top right image: preset number 2
®
6
®
10
®
14
–
Bottom left image: preset number 3
®
7
®
11
®
15
–
Bottom right image: preset number 4
®
8
®
12
®
16
Preset sequence stops if operations are performed manually during preset operations. In Quad PTZ, preset
sequence stops for all the images if operations are performed manually on any screen.
•
Default: Off
Note
•
This function is also useful to automatically set the camera in a specific mode when the power of the
camera is turned on.
•
The self return function works even when the setup menu is displayed.
Operating Instructions 89
11 Configure the settings relating to images and audio [Image/Audio]