Recording operations
24
RQT7502
Recording
OPEN
Recording from the radio
•
Do the preparatory steps
(
A
see above).
•
Tune to the required station
(
A
page 22, The radio)
.
TAPE
REC
SHIFT
+
To stop recording.
Press [
L
STOP].
When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.
Types of tapes which can be recorded correctly
Use normal position tapes.
High position and metal position tapes can be used, but the unit will
not be able to record or erase them correctly.
Preparatory steps
Do these steps before each recording.
Wind up the leader tape so recording can begin immediately.
The tape direction is automatically set to “F
3
”.
To record on the reverse side
Press [
/ -
TAPE] twice, then press [
L
STOP].
•
Press [PLAY MODE] to select the reverse mode.
Every time you press the button:
: One side only records.
,
: Both sides record (forward
→
reverse).
“
” is automatically changed to “
” when [SHIFT]+[
a
REC]
(main unit: [
[
REC]) is pressed.
Recording from disc(s)
•
Do the preparatory steps
(
A
see above).
•
Insert the disc(s) you want to record
(
A
page 12, Discs—Basic
play)
.
STOP
DISC
ALL DISC
TAPE
REC
SHIFT
+
To stop recording (disc play stops automatically).
Press [
L
STOP].
Front side
The interrupted track is re-recorded in its entirety
on the reverse side
Reverse side
While recording, if a track is cut off in the middle at the end of the front
side, it is re-recorded from the beginning on the reverse side.
At the end of the reverse side, recording stops and the current track
will be interrupted.
Press to start
recording.
Press to open and insert a cassette
(tape facing you, see
A
A
page 23, Insert cassette – make
sure that the cassette is fully inserted and close the lid by
hand).
1
Select the
disc.
2
Press to stop
playback.
3
Press to start
recording
(play starts).
RQT7502_24_25_new1
2/3/04, 9:28 AM
24
