Panasonic SC-ZT2s, Руководство по эксплуатации

Страница: 13 / 32

VQT2R70
13
1. Turn the main unit on.
Press
• “ 2CH SEARCH ” appears on the display.
(This is displayed only at the first-time setting.)
2. Turn 2 speakers on.
[WIRELESS LINK]
indicator
Press
WIRELESS LINK
POWER
• The color of the [WIRELESS LINK] indicator changes from red to
green.
• When the [WIRELESS LINK] indicator of each speaker lights
green, “ 2CH SEARCH ” display disappears.
3. Press and hold [CH] on the remote control for about 3 seconds until “ 2 SPKR SET ” is
displayed on the main unit’s display.
Always aim the
remote control at
the main unit for
operation.
Press and hold
(about 3 seconds)
“ 2 SPKR SET ”
4. Press the remote control button corresponding to the speaker outputting the con fi rmation
sound.
When the sound is
output from the front
speaker (left),
press [GAME].
When the sound is output
from the front speaker
(right), press [MUTE].
Front speaker
(left) Front speaker
(right)
GAME MUTE
• Sound is output from either of the speakers.
• When you press the button corresponding to the con fi rmation sound of a speaker, another speaker outputs the con fi rmation
sound. Press the corresponding button in the same way and complete settings for the 2 speakers.
• When “ COMPLETE ” disappears from the main unit’s display, the speaker setting is complete.
Note
• Check if the speakers are properly set after setting the speakers. ( ➜ page 14)
• If the speakers are set incorrectly in step
4
, turn the main unit off then on again and perform steps
3
and
4
.
• If the [WIRELESS LINK] indicator does not change from red to green, see page 27 of “Troubleshooting guide”.
Speaker setting
„
Make sure that all equipment has been turned off.
(When the VIERA Link “HDAVI Control” compatible Panasonic TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are
connected, do not turn on the TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) until the setting is complete.)
„
Connect the AC power supply cords of main unit and 2 speakers to household AC outlets.
(
➜
page 12)
„
Make sure that the main unit and speakers have been turned off.
„
Prepare the remote control. ( ➜ page 7)
Preparations
Make sure to make this setting when using for the fi rst time after purchase.
Setting the speakers
Speaker setting
Connection
When installing surround speakers
See “Installing surround speakers” ( ➜ page 14) and “Setting
surround speakers” ( ➜ page 15).
5%<6228364'PKPFF 5%<6228364'PKPFF ඦ೨ ඦ೨