23
R
Q
T
X
1234
G
e
tti
n
g
S
tar
ted
P
layi
n
g
Di
scs
Ot
h
e
r Op
e
ra
ti
o
ns
Refer
e
n
c
e
“DVD U11”
Disc may be dirty. Wipe it clean.
“ERROR”
Incorrect operation performed. Read the instructions and
try again.
“DVD H
∑∑
”
“DVD F
∑∑∑
”
∑
stands for a number.
≥
Trouble may have occurred. The numbers following “H”
and “F” depend on the status of the unit. Turn the unit
off and then back on. Alternatively, turn the unit off,
disconnect the AC mains lead, and then reconnect it.
≥
If the service numbers fail to clear, note the service
number and contact a qualified service person.
“U70
∑
”
∑
stands for a number. (The actual number following
“U70” will depend on the state of this unit.)
≥
The HDMI connection acts unusually.
–The connected equipment is not HDMI-compatible.
–Please use High Speed HDMI Cables that have the
HDMI logo (as shown on the cover).
–The HDMI cable is too long.
–The HDMI cable is damaged.
“REMOTE 1” or “REMOTE 2”
Match the modes on this unit and remote control.
Depending on the number being displayed (“1” or “2”),
press and hold [OK]
8
and the corresponding numbered
button ([1] or [2]) for at least 2 seconds. (
B
4)
No response when any buttons are pressed.
≥
This unit cannot play discs other than the ones listed in
these operating instructions. (
B
20)
≥
The unit may not be operating properly due to lightning,
static electricity or some other external factor. Turn the
unit off and then back on. Alternatively, turn the unit off,
disconnect the AC mains lead, and then reconnect it.
≥
Condensation has formed. Wait 1 to 2 hours for it to
evaporate.
No response when remote control buttons are
pressed.
≥
Check that the batteries are installed correctly. (
B
8)
≥
The batteries are depleted. Replace them with new
ones. (
B
8)
≥
Aim the remote control at the remote control signal
sensor and operate. (
B
4)
Other products respond to the remote control.
Change the remote control operating mode. (
B
4)
Cannot display the START menu.
Remove the disc and then press [START]
B
again.
No picture or sound.
≥
Check the video or speaker connection. (
B
6, 7)
≥
Check the power or input setting of the connected
equipment and this unit.
≥
Check that the disc has something recorded on it.
≥
During HD JPEG playback, there will be no video output
from the VIDEO OUT terminal.
No on-screen menus/displays.
[JPEG]
This is normal during HD JPEG playback.
You have forgotten your ratings password.
Reset all the settings to Factory Preset.
While stopped and “DVD/CD” is the source, press and
hold [
∫
]
6
on this unit and [
S
10]
2
on the remote control
until “RESET” appears on this unit’s display. Turn the unit
off and on again.
All settings will return to the default values.
Some characters are not displayed correctly.
Characters other than English alphabet and Arabic
numerals may not be displayed correctly.
The VIERA Link “HDAVI Control” function does not
respond.
Depending on the condition of this unit or the connected
equipment, it may be necessary to repeat the same
operation so that the function can work correctly. (
B
15)
The setting you made in “TV Aspect” (
B
17, Video
menu) or “Display” (
B
17, Language menu) does not
work.
The settings for “TV Aspect”
§
1
and “Display”
§
2
will
automatically follow the information from the TV. (
B
8,
Easy setup)
§
1 When using VIERA Link “HDAVI Control” with
“HDAVI Control 3 or later” compatible TV
§
2 When using VIERA Link “HDAVI Control” with
“HDAVI Control 2 or later” compatible TV
It takes time before play starts.
≥
Play may take time to begin when an MP3 track has still
picture data. Even after the track starts, the correct play
time will not be displayed. This is normal.
[MP3]
≥
This is normal on DivX video.
[DivX]
A menu screen appears during skip or search.
[VCD]
This is normal for Video CDs.
Playback control menu does not appear.
[VCD]
with playback control
Press [MENU]
C
to change to PBC on and then press
[RETURN]
D
during playback.
Play does not start.
≥
If playing DivX VOD content, refer to the homepage
where you purchased the DivX VOD content. (Example:
http://vod.divx.com)
[DivX]
≥
If a disc contains CD-DA and other formats, proper
playback may not be possible.
No subtitles.
≥
Display the subtitles. (“Subtitle” in Menu 1) (
B
14)
≥
Subtitles may not be displayed depending on the disc.
[DivX]
Point B is automatically set.
The end of an item becomes point B when it is reached.
The Setup menu cannot be accessed.
Select “DVD/CD” or “USB” as the source.
General operation
Disc operation
SC-XH150 EB_eng.book Page 23 Monday, January 10, 2011 6:57 PM
