Panasonic SC-TM910DVD, Руководство по обслуживанию, Страница: 38 / 59

Error Code Diagnosis Contents Description of error Automatic FL Display Remarks
LOAD Tray drive assembly
abnormal Tray unit does not move
from “STOCK” to “PLAY”
position For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
PDRV Cam gear/gear
assembly abnormal Cam gear does not
move from “HOME” to
“PLAY” drive position.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
UDU UD base asssembly
abnormal UD Base assembly does
not move upwards from
tray 5 to tray 2 For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
UDD UD base asssembly
abnormal UD Base assembly does
not
move downwards
from tray 1 to tray 5.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
UD1 UD base asssembly
abnormal UD Base assembly does
not move to tray 1. For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
F1NG Fail - safe mode. (For
open/close tray
unit(s)) When the tray open
operation is performed, it
fails
to open. It will
automatically close all
trays after the time-out
by the microprocessor.
During this time when it
fails, the error code will
appear.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
F2NG Fail - safe mode. (For
open/close tray
unit(s)) When the tray close
operation is performed, it
fails
to close. It will
automatically open all
trays after the time-out
by the microprocessor.
During this time when it
fails, the error code will
appear.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
SRVC_TRV To unlock the
traverse unit for
service 1. All trays set to
“STOCK” position
2. Mechanism set to
tray 5
3. Cam gear set to
“HOME” position
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit.
RSET Cam gear jam/close
sensor faulty During tray re-open, the
cam gear will rotate in
the opposite direction to
reset
the cam gear
position. When it fails,
the
error code will
appear.
For CD/DVD changer unit (CRS1D).
Press [SINGLE CHANGE] on main unit
for next error.
CRS1D Error Code display
1. The errors that occured in CRS1D Mechanism can be recalled and displayed, in the order of the occurence under self-
diagnostic (Refer to Section 10.3 for procedures to enter this mode.
•
Only the first 5 errors will be memorized (in backup memory). The subsequence error shall be ignored and not memorize.
39
SA-VK950GC / SA-VK950GS / SA-VK950GCS / SA-VK950GCT
38
manual de servicio SC-TM910DVD