Panasonic SC-TM910DVD, Руководство по обслуживанию, Страница: 36 / 59

10.3.3. Error Code Table
Self-Diagnosis Function (refer Section 10.3) provides information on any problems occuring for the unit and its respective
components by displaying the error codes. These error code such as U**, H** and F** are stored in memory and held unless it is
cleared.
The error code is automatically display after entering into self-diagnostic mode.
Error Code Diagnosis Contents Description of error Automatic FL Display Remarks
H01 Mode SW, plunger
and capstan motor
abnormal The tray is not able to
open. For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
H02 Rec INH SW
abnormal (Spindle servo, DSC
(IC8251) Spindle motor,
CLV servo error)
For deck mechanism unit (For deck 2).
Press [
] on main unit for
next error.
H03 HALF SW abnormal (Traverse motor,
IC8251)
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
F15 RESET SW
abnormal REST SW: ON is not
detected
within the
specified time.
For DVD unit (For Traverse).
Press [
] on main unit for
next error.
F26 Transmission error
between CD Servo
LSI IC and
microprocessor IC When set to CD mode,
the sense signal does
not turn “Low”, a fail safe
time
after system
command transmission
is sent.
For DVD unit (For Traverse).
Press [
] on main unit for
next error.
37
SA-VK950GC / SA-VK950GS / SA-VK950GCS / SA-VK950GCT
36
manual de servicio SC-TM910DVD