27
Using the
VIERA Link
“HD
A
VI Contr
o
l
TM
”
E
N
GLIS
H
RQ
TX00
98
You can select whether audio is output from this unit’s speakers or the TV
speakers by using the TV menu settings. For details, refer to the operating
instructions of your TV.
Home Cinema
This unit’s speakers are active.
≥
When this unit is in standby mode, changing the TV speakers to this
unit’s speakers in the TV menu will automatically turn this unit on and
select “AUX”
§
or “D-IN”
§
as the source.
≥
The TV speakers are automatically muted.
≥
You can control the volume setting using the volume or mute button on
the TV’s remote control. (The volume level is displayed on the main
unit’s FL display.)
≥
To cancel muting, you can also use this unit’s remote control (
➜
12).
≥
If you turn off this unit, TV speakers will be automatically activated.
TV
TV speakers are active.
≥
The volume of this unit is set to “0”.
– This function works only when “DVD/CD”, “USB”, “AUX”
§
or “D-IN”
§
is
selected as the source on this unit.
≥
Audio output is 2-channel audio.
When switching between this unit’s speakers and TV speakers, the TV
screen may be blank for several seconds.
You can control the playback menus of this unit with the TV’s remote
control. When operating the TV’s remote control, refer to the below
illustration for operation buttons.
1
Select this unit’s operation menu by using the TV menu settings.
(For details, refer to the operating instructions of your TV.)
The START menu will be shown.
e.g.
[DVD-V]
≥
The START menu can also be shown by using a button on the TV’s
remote control (e.g. [OPTION]).
– When “DVD/CD” or “USB” is selected as the source, this works
only during stop mode.
– This does not work while iPod music playback screen is displayed
on the TV.
2
Select the desired item on the START menu (
➜
13).
When the on-screen control panel appears
e.g.
[DVD-V]
(when “Playback Disc” is selected from the START menu.)
You can operate the playback with the indicated controls.
≥
The on-screen control panel can also be shown by using a button on the
TV’s remote control (e.g. [OPTION]).
– This works only during “DVD/CD” or “USB” playback and resume
modes or, while iPod music playback screen is displayed on the TV.
If the TV has automatically switched to the HDMI input mode for this
unit (
➜
26, Auto input switching)
When you press [EXIT] button on the TV’s remote control to exit VIERA
Link Control, the TV will automatically switch to TV tuner mode. (This
does not work when this unit is in “IPOD” mode or, during playback or
resume mode when “DVD/CD” or “USB” is selected as the source.)
[Note]
≥
Depending on the menu, some button operations cannot be performed
from the TV’s remote control.
≥
You cannot input numbers with the numbered buttons on the TV’s
remote control ([0] to [9]). Use this unit’s remote control to select the
play list etc.
Speaker control
VIERA Link Control only with TV’s remote
control [for “HDAVI Control 2 (or later)”]
DVD/CD
Home Cinema
OK
RETURN
Input
S
election
S
ound
Playback Di
s
c
TOP MENU (DVD)
MENU (DVD)
Playback/
menu access
S
EARCH
RETURN
S
EARCH
PLAY
PAU
S
E
S
TOP
27
SC-PT560_860E-RQTX0098-R_eng.book Page 27 Tuesday, December 4, 2007 9:02 AM
Downloaded From TheatreSystem-Manual.com Manuals
