27
RQ
TX02
16
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
§
Refer to “Frame still and field still” (
B
35, Glossary).
VIDEO OUT – SCART
Choose the video signal format to be output from the
SCART (AV) terminal.
≥
VIDEO
≥
S-VIDEO
≥
RGB 1: (Only when connected to a RGB compatible
TV)
If you always would like to view the picture from the unit
in RGB signal, select this mode. The TV screen will
automatically switch to display the picture from the unit
when the unit is turned on.
≥
[RGB\2]
: (Only when connected to a RGB compatible
TV)
When in TV tuner mode, if the selector is set to “DVD/CD”,
the TV screen will automatically switch to display the
picture from the unit only during disc playback (
[DVD-V]
[DVD-VR]
[VCD]
) or when viewing on-screen menu of DVD/
CD.
The TV picture will be displayed when the selector is set
to “AV”. With other selectors, the picture from this unit will
be displayed.
Select to suit the type of equipment you connected to the
HDMI AV OUT terminal.
Select “BITSTREAM” when the equipment can decode
the bitstream (digital form of 5.1-channel data).
Otherwise, select “PCM”.
(If the bitstream is output to the equipment without a
decoder, high levels of noise can be output and may
damage your speakers and hearing.)
DOLBY DIGITAL
§
≥
[BITSTREAM]
≥
PCM
DTS
§
≥
[BITSTREAM]
≥
PCM
MPEG
§
≥
BITSTREAM
≥
[PCM]
§
When audio is output from HDMI AV OUT terminal,
and the connected equipment does not support the
item selected, the actual output will depend on the
performance of this connected equipment.
(Continued on next page)
STILL MODE
Specify the type of picture shown when paused.
≥
[AUTO]
≥
FIELD
§
: The picture is not blurred, but picture quality
is lower.
≥
FRAME
§
: Overall quality is high, but the picture may
appear blurred.
AUDIO menu
DYNAMIC RANGE
≥
ON: Adjusts for clarity even when the volume is low.
Convenient for late night viewing. (Only works
with Dolby Digital)
≥
[OFF]
SPEAKER SETTINGS
Select the delay time of the speakers.
(Effective when playing 5.1-channel sound)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the
speakers, except for the subwoofer, should be the same
distance from the seating position.
If you have to place the center or surround speakers
closer to the seating position, adjust the delay time to
make up for the difference.
If either distance
a
or
b
is less than
c
, find the
difference in the table and change to the recommended
setting.
a
Center speaker
b
Surround speaker
Difference
(Approx.)
Setting
Difference
(Approx.)
Setting
30 cm
1ms
150 cm
5ms
60 cm
2ms
300 cm
10ms
90 cm
3ms
450 cm
15ms
120 cm
4ms
150 cm
5ms
≥
SETTINGS:
≥
C DELAY (Center Delay):
[0ms]
, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
≥
LS/RS DELAY (Left Surround/Right Surround
Delay):
[0ms]
, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
≥
TEST TONE: SETTING
Use the test tone for speaker level adjustments
(
B
13, Adjusting the speaker output level manually).
DISPLAY menu
LANGUAGE
Choose the language for the on-screen messages.
≥
[ENGLISH]
≥
FRANÇAIS
≥
ESPAÑOL
≥
DEUTSCH
≥
ITALIANO
≥
SVENSKA
≥
NEDERLANDS
≥
POLSKI
L
LS
R
SW
C
RS
C
RS
LS
: Actual speaker position
: Ideal speaker position
: Primary listening
distance
Approximate room dimensions
Circle of constant primary listening distance
SC-PT470EB-RQTX0216-B_eng.book Page 27 Monday, December 22, 2008 3:28 PM
