12
RQ
TX02
16
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
Selecting the playback source (continued)
Press [SELECTOR] on this unit to select source from this
unit. (
B
39)
[Note]
Confirm the audio connection to the SCART (AV), AUX or
OPTICAL IN terminal on this unit when you select the
corresponding sources (
B
7). Reduce the volume on the TV
to its minimum, and then adjust the volume of this unit.
Select to suit the type of audio from the
OPTICAL IN
terminal on this unit.
(When receiving true 5.1-channel surround sound, select
“PCM OFF”.)
[Note]
≥
Audio that is input through the OPTICAL IN terminal is
not output from the HDMI terminal.
≥
Underlined items in the above are factory settings.
Enjoying sound from all speakers and various sound
effects
≥
The following sound effects may not be available or
have no effect with some sources, or when headphones
are used (
B
39).
≥
You may experience a reduction in sound quality when
these sound effects are used with some sources. If this
occurs, turn the sound effects off.
Selecting the source by the remote control
DVD/CD (
B
9)
Each time you press the button:
FM (
B
10)
AV:
For audio input through the
SCART (AV) terminal.
AUX
§
:
D-IN
§
:
For audio input through the
AUX terminal.
For audio input through the
OPTICAL IN terminal.
(
B
right)
§
“(TV)” will appear beside “AUX”
or “D-IN”, indicating the TV audio
setting for VIERA Link “HDAVI
Control” (
B
24).
USB (
B
21)
iPod (
B
22)
DVD
iPod
U
S
B
EXT-IN
RADIO
S
TART
S
ETUP
DVD
USB, iPod
SETUP
START
RADIO, EXT-IN
DVD
EXT-IN
RADIO
iPod
USB
Making settings for digital audio input
1 While in “D-IN” mode
Press [SETUP] to select “MAIN/SAP”, “DRC” or
“PCM FIX”.
2 While the selected mode is displayed
Press [
3
,
4
] to make the setting.
MAIN/SAP mode
(Only works with Dolby Dual Mono):
MAIN, SAP
§
,
MAIN+SAP
§
(stereo audio)
§
“SAP” = Secondary Audio Program
Dynamic Range Compression
DRC ON:
Adjust for clarity even when the volume is
low by compressing the range of the lowest
sound level and the highest sound level.
Convenient for late night viewing. (Only
works with Dolby Digital)
DRC OFF:
The full dynamic range of the signal is
reproduced.
PCM FIX mode
PCM ON:
Select when receiving only PCM signals.
PCM OFF:
Select when receiving Dolby Digital and
PCM signals.
OK
S
OUND
S
URROUND
-CH
S
ELECT
S
ETUP
W.
S
RD
VOL
OK
SETUP,
−CH SELECT
SURROUND
SOUND
W.SRD
+, VOL
Enjoying surround sound effects
SURROUND OUTPUT indicator on
this unit will light up when there is
surround sound effect.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/
encoded. Speaker output varies
depending on the source.
MULTI-CH:
You can enjoy sound from the front
speakers, as well as the surround
speakers even when playing a
2-channel sound or non-surround
sound.
MANUAL:
(
B
13)
SURROUND
SC-PT470EB-RQTX0216-B_eng.book Page 12 Monday, December 22, 2008 3:28 PM
