4
Si
mp
le
S
etu
p
Ass
e
mb
ling the
fr
ont s
p
ea
ker
s
RQ
TX00
87
ENGL
ISH
Preparation
≥
To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥
For assembly, use a Phillips-head screwdriver.
≥
For optional wall mount, refer to page 6.
∫
Preventing the speakers from falling
≥
You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥
Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
step
1
Assembling the front speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers
(with cover plate)
2 Stands
(with cable)
2 Bases
8 Screws
6
Tighten securely.
Slide into the groove.
Position the
cable between
the ridges.
Tighten securely.
Press into the groove.
Insert the wire fully.
i
: White
j
: Blue
Push!
Cover plate
Remove using a flat
object.
≥
Keep for wall-mount
use (
➜
6).
String
(not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker
Wall
Approx.
150 mm
Screw eye
(not included)
4
SC-PT465E-RQTX0087-1R_eng.book Page 4 Wednesday, January 30, 2008 4:13 PM
