13
TQ
BM
087
3
█
Radio
Sound is distorted.
•
Use an optional outdoor antenna. The antenna should be
installed by a competent technician.
A beat sound is heard.
•
Turn off the TV or move it away from the system.
•
Move mobile telephones away from the system if the
interference is apparent.
█
Bluetooth
®
Pairing cannot be done.
•
Check the Bluetooth
®
device condition.
•
The device is out of the 10 m (33 ft) communication range.
Move the device nearer to the system.
The device cannot be connected.
•
The pairing of the device was unsuccessful. Do pairing
again.
•
The pairing of the device has been replaced. Do pairing
again.
•
This system might be connected to a different device.
Disconnect the other device and try pairing the device
again.
•
The system may have a problem. Turn off the system and
then turn on again.
•
If “MODE 2” is selected in “LINK MODE”, select “MODE 1”.
The device is connected but audio cannot be heard
through the system.
•
For some built-in Bluetooth
®
devices, you have to set the
audio output to “SC-PM700” manually. Read the operating
instructions of the device for details.
Sound from the device is interrupted.
•
The device is out of the 10 m (33 ft) communication range.
Move the device nearer to the system.
•
Remove any obstacle between the system and the device.
•
Other devices that use the 2.4 GHz frequency band
(wireless router, microwaves, cordless phones, etc.) are
interfering. Move the device nearer to the system and
distance it from the other devices.
•
Select “MODE 1” for stable communication.
Playback image and sound are not synchronized.
•
Restart the playback app of the device.
█
Main unit displays
“--:--”
•
You connected the AC power supply cord for the first time or
there was a power failure recently. Set the clock.
•
Track play time is more than 99 minutes.
“ADJUST CLOCK”
•
The clock is not set. Adjust the clock.
“ADJUST TIMER”
•
The play timer is not set. Adjust the play timer.
“AUTO OFF”
•
The system has not been used for 20 minutes and will turn
off within a minute. To cancel, press any button.
“ERROR”
•
An incorrect operation was done. Read the instructions and
try again.
“F61”
“F77”
•
Disconnect the AC power supply cord and consult your
dealer.
“F703”
•
Examine the Bluetooth
®
connection.
•
Disconnect the Bluetooth
®
device. Turn off the system and
then turn on again.
“F76”
•
There is a problem with the power supply.
•
Disconnect the AC power supply cord and consult your
dealer.
“NO DEVICE”
•
The USB device is not connected. Examine the connection.
“NO DISC”
•
You have not put in a disc.
“NO PLAY”
•
There is no album or track in the USB device.
•
Examine the content. You can only play supported format.
•
The system may have a problem. Turn off the system and
then turn on again.
“PLAYERROR”
•
You played an unsupported MP3 file. The system will skip
that track and play the next one.
“REMOTE 1”
“REMOTE 2”
•
The remote control and the main unit are using different
codes. Change the code of the remote control.
–
When “REMOTE 1” is shown, press and hold [OK] and
[
] on the remote control for a minimum of 4 seconds.
–
When “REMOTE 2” is shown, press and hold [OK] and
[USB/CD] for a minimum of 4 seconds.
“SOUND 1 NOT SET”
“SOUND 2 NOT SET”
“SOUND 3 NOT SET”
•
You have not saved the sound effects into the sound setting
number.
“USB OVER CURRENT”
•
The USB device is using too much power. Disconnect the
USB device, turn off the system and then turn on again.
•
Check the connection, it may be caused by a faulty USB
cable.
“VBR”
•
The system cannot show the remaining play time for
variable bit rate (VBR) tracks.
ENGLISH
PM700PP_TQBM0873_en.fm Page 13 Friday, March 17, 2023 4:34 PM
