RQTX0182
10
Using sound effects (continued)
Enhancing the stereo sound:
Enhancing the stereo sound:
Surround
Surround sound
sound
Enable you to add natural width and depth to the stereo sound.
To activate
Press [SURROUND] to display “
” indicator.
To cancel
Press [SURROUND] again to clear “
” indicator.
Note:
• Surround-sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the
surround-sound effect.
Changing the sound quality:
Changing the sound quality:
RE-MASTER
RE-MASTER
MP3
This feature reproduces the frequencies lost during recording to
give you a sound closer to the original.
Press [RE-MASTER] repeatedly to select either
“ON RE-MASTER” or “OFF RE-MASTER”.
USB
MP3
The USB connectivity enables you to connect and play MP3 tracks
from USB mass storage class. Typically, USB memory devices.
(Bulk only transfer)
Connecting a USB mass storage device
Connecting a USB mass storage device
Preparation
Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up
.
It is not recommended to use a USB extension cable. The USB
device is not recognised by this unit.
USB enabled
device
(not included)
Playing a USB mass storage device
Playing a USB mass storage device
1
Reduce the volume and connect the USB mass storage
device to the USB port.
2
Press [
6
, USB] or [OK] to start play.
Pause play
Press [
6
, USB].
Press again to resume play.
Stop play
Press [
7
] (stop).
“RESUME” is displayed. The position is
memorised.
Press [
6
, USB] to resume play.
Press [
7
] (stop) again to clear the position.
Skip tracks
Press [
4
/
1
] or [
¡
/
¢
].
Skip album
Press [
5
/
∞
, ALBUM] in the play mode.
Press [
5
/
∞
, ALBUM] once and then the
numeric buttons in the stop mode.
Using other optional equipments
Note:
All peripheral components and cables are sold separately.
Connecting to a portable audio equipment
Connecting to a portable audio equipment
This feature enables you to enjoy music from a portable audio
equipment.
Audio cord (not included)
Portable audio equipment
(not included)
Playing a portable audio equipment
Playing a portable audio equipment
Switch off the equaliser function (if there is any) of the portable
audio equipment before you plug into the MUSIC P. jack. Otherwise,
sound from the speaker may be distorted.
1
Plug the audio cord into the MUSIC P. jack.
2
Press [MUSIC PORT] (main unit: [MUSIC P.]) to select
“MUSIC PORT”.
3
Play the portable audio equipment. (See the portable audio
equipment’s instruction manual.)
Level adjustment
Level adjustment
You can select the sound input level of your portable audio
equipment.
Press [INPUT LEVEL] to select your desired setting.
NORMAL
HIGH
Note:
Select “NORMAL” if the sound is distorted when level HIGH is
activated.
Avoid interfering with other
Avoid interfering with other
Panasonic equipment
Panasonic equipment
Other Panasonic audio or video equipment may start functioning
when you operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote
control operating mode to “REMOTE 2”.
The main unit and remote control must be set to the same
mode.
1
Press and hold [MUSIC P.] on the main unit and [2] on
the remote control until the main unit’s display shows
“REMOTE 2”.
2
Press and hold [OK] and [2] on the remote control for at
least 2 seconds.
To change the mode back to “REMOTE 1”, repeat both steps above
by replacing [2] with [1].
RQTX0182-B_En.indd 10
RQTX0182-B_En.indd 10
3/4/09 3:45:13 PM
3/4/09 3:45:13 PM
