11
VQT4U55
ENGLISH
With this method you will share the wireless
network settings of your iPod touch/iPhone/iPad
with this system.
≥
The following explanations are based on an iPhone.
1
Disconnect any devices connected to the CD
unit.
2
Connect the
iPhone
to your
home wireless
network
.
3
Connect the
iPhone
to
the CD unit
.
Choose one of the following connections.
“IPOD_DOCK” connection compatible
iPod touch/iPhone:
iPod touch/iPhone/iPad with iOS 5.0 or later:
Connect to the iPod port on the side of the CD
unit with a dedicated USB cable.
4
Unlock your iPhone and then press and hold
[
s
NETWORK SETUP]
on the CD unit for more
than 3 seconds.
≥
If “NOT SUPPORTED” or “SET WI-FI” is displayed,
check that the iPhone is connected to the wireless
network and try again from step 1.
5
A message will pop-up on your iPhone.
Allow the iPhone to share the wireless network
settings.*
1
{.
The Wi-Fi status indicator blinks.
6
The settings are completed when “
SUCCESS
”
is displayed and the Wi-Fi status indicator
stops blinking
and
lights in blue
.
7
Press [OK] on the remote control to exit the
settings.
*1: Depending on the network environment or the wireless
network router settings, it may take more than 10 mins. to
complete the settings.
Method 2
If you're using an iPod touch/iPhone/iPad.
(iOS version 5.0 or later.)
If “FAIL” is displayed press [OK] and try the
setting again. If “FAIL” is still displayed, try other
methods on page 10 or 12.
≥
If the iPhone was disconnected midway through, try again
without disconnecting it.
PPC_SC-NE5~VQT4U55.book 11 ページ ２０１３年１月１７日 木曜日 午前１１時７分
