11
VQT4T91
ENGLISH
2
Attach the wall mount bracket to the wall with
2 screws (not supplied). (Both sides)
≥
Use a level to ensure both wall mount brackets are
level.
3
Fix the safety holder onto the unit with the
screw (supplied).
{.
Screw tightening torque: 50 N
0
cm (0.4 lbf
0
ft) to
70 N
0
cm (0.5 lbf
0
ft).
4
Attach the fall prevention cord (not supplied) to
this unit.
5
Hook the unit securely onto the wall mount
brackets with both hands.
≥
Connect the AC power supply cord to the unit before
hanging the unit onto the wall. (
l
6)
≥
After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall.
6
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥
Refer to step 2 for requirements before screwing.
7
Attach the fall prevention cord (not supplied) to
the wall.
≥
Make sure that the slack of the cord is minimal.
At least 30 mm (1
3
/
16
q
)
‰
7.5 mm (
19
/
64
q
) to
‰
9.4 mm (
3
/
8
q
)
‰
4 mm
(
5
/
32
q
)
Wall mount bracket
Screw
(supplied)
Cord
(not supplied)
Wall
Safety holder fixing screw
(not supplied)
Safety holder
Fixed to the wall
Cord (not supplied)
Screw eye (not supplied)
Wall
SC-NE1_PPC~VQT4T91.book 11 ページ ２０１２年１２月１９日 水曜日 午後４時４３分
