background image

Getting started

VQT5J41

11

Precautions

Choose a placement method that suits you best.

When placing the main unit in front of the TV

The main unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic 
Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D 
compatible TV.

If interference occurs, move the main unit further away from the TV. If the TV still does not function 
correctly, try using it in a rack or in the wall mount position.

If the TV’s remote control sensor is blocked by the main unit

Try using the TV’s remote control from a different angle.

 

Do not use the main unit in a metal cabinet.

If irregular coloring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the main unit further 
away from the TV.

Keep magnetized items away. Magnetized cards, watches, etc., can be damaged if placed too close to the main unit.

Keep the main unit approximately 150 mm (6

q

) away from the TV.

Selecting the placement method

When placing the main unit 
on a rack or on a table

Place the main unit on a flat 
and horizontal surface.

Place the main unit in front of 
the TV pedestal.

When attaching the main 
unit to a wall

Place the main unit on a 
flat and vertical surface.

Page 12

Page 13

SC-HTB8P_VQT5J41_P.book  11 ページ  2014年3月24日 月曜日 午前10時35分

Содержание SC-HTB8

























Отзывы: