53
RQT7708
Picture incorrect
Disc picture incorrect
VHS picture incorrect
Progressive video
Sound incorrect
Listening to the radio
Recording
Picture distorted.
≥
Ensure that the unit is connected directly to the television, and is not connected through an
A/V selector or other equipment.
14
The television may display
incorrectly or colors appear faded.
≥
The unit and television are using different video systems. Use a multi-system or NTSC television.
≥
The system used on the disc doesn’t match your television. PAL discs cannot be played.
This unit converts DVD-Audio recorded in PAL to NTSC for play, however, play may not
function properly.
—
—
The picture on the television
disappears or stripes appear on
the screen.
≥
Mobile telephone chargers can cause some disturbance.
≥
If you are using a TV indoor antenna, change to an outdoor antenna.
≥
The television antenna wire is too close to the unit. Separate the antenna wire of the
television from the unit.
—
—
—
Picture size doesn’t fit the screen.
≥
Change “TV Aspect” in “Video” tab.
≥
Use the television to change the aspect. If your television does not have that function,
change “4:3 Aspect” in Display Menu.
≥
Change the Zoom setting.
30
29
22
Menus not displayed correctly.
≥
Restore the zoom ratio to
a
1.00.
≥
Set “Subtitle Position” in Display Menu to “0”.
≥
Set “4:3 Aspect” in Display Menu to “Normal”.
22
29
29
Auto zoom function does not work
well.
≥
Turn off TV’s zoom function.
≥
Use the other preset aspect ratios or manual adjustment.
≥
Zoom function may not work well, especially in dark scenes and may not work depending
on the type of disc.
—
22
—
The picture is noisy or is in black
and white.
Horizontal bars or lines run down
the screen.
≥
Adjust the tracking.
≥
Make sure the television’s input setting is correct.
≥
The video heads are dirty: clean them with a head-cleaning cassette.
≥
The video heads are worn: consult your dealer.
≥
The tape is old or damaged.
≥
You cannot correctly play tapes recorded with other systems (e.g., PAL).
33
—
54
—
—
—
Picture is distorted when stilled or
during slow-motion.
≥
Some distortion is normal with tapes recorded using VP mode.
—
The blue back appears during play.
≥
You are playing a blank or poor quality part of the tape.
≥
You can damage the unit if you play dirty or damaged tapes and this can cause the blue
back to appear. Consult your dealer.
—
—
The picture jiggles.
≥
Adjust the vertical hold.
33
There is ghosting when
progressive output is on.
≥
Change “Video Output Mode” in Picture Menu to “480I”. This problem is caused by the editing
method or material used on DVD-Video, but should be corrected if you use interlace output.
29
Pictures not in progressive output.
≥
If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT output will
be interlace.
≥
Press [SHIFT]
i
[PROGRESSIVE]. Or select “480P” in “Video Output Mode” in Picture Menu.
—
20, 29
Closed captions not displayed.
≥
When progressive output is on, closed captions will not be displayed.
—
Sound distorted.
≥
Noise may occur when playing WMA files.
—
Effects do not work.
≥
Some audio effects do not work or have less effect with some discs.
≥
Multi Re-master and Dolby Pro Logic
II
do not work if you have changed the play speed.
≥
When connected with headphones, only Sound Field Control is effective.
—
—
—
Humming heard during play.
≥
An AC power supply cord or fluorescent light is near the subwoofer. Keep other appliances
and cords away from the subwoofer.
—
There is noise when playing a
video tape.
≥
Adjust the tracking.
≥
The tape is old or damaged.
33
—
Noise is heard.
“ST” flickers or doesn’t light.
Sound is distorted.
≥
Adjust the position of the FM or AM antenna.
≥
Use an outdoor antenna.
—
45
A beat sound is heard.
≥
Turn the television off or separate it from the unit.
—
A low hum is heard during AM broadcasts.
≥
Separate the antenna from other cables.
—
“
” flashes when I try to start
recording.
Cannot record.
≥
If the erasure prevention tab has been removed, cover the hole with adhesive tape.
5
Timer recording doesn’t record a
program correctly.
≥
Check the clock and calendar.
≥
Set the channel and start and end times correctly.
≥
Be sure to press [
F
] after programming to put the unit in timer recording standby.
≥
Program times may be overlapped.
—
—
36
—
Cannot record from other
equipment.
≥
Press [
W
CH] or [
X
CH] to select “AU”.
≥
Check the connections to the other equipment.
35
35
Black bands appear in the recording.
≥
Move the other equipment away from the television as it may be picking up interference.
—
The copy of a videotape or DVD is
very poor.
≥
This unit complies with industry standards regarding the recording and duplication of copy-
protected material. This includes commercial videotapes and DVDs. Consequently, copying
not only infringes copyright laws but also presents serious technical difficulties. Even in
cases where a copy can be made, the quality will be very poor.
—
7708en.book 53 ページ ２００４年２月１４日 土曜日 午後３時２４分
